202169-4 TE Connectivity, 202169-4 Datasheet - Page 26

• Manufacturer Part Number: 202169-4
• Description: M-SERIES HALF SHIELD KIT
• Manufacturer: TE Connectivity
• Type: Shieldr

Specifications of 202169-4

• Rohs Compliant: YES
• Product Type: Hardware
• Shield Material: Steel
• Screw Material: Steel
• Hardware Type: Shield
• Mounting Hardware: None
• Shield Style: Two-piece
• Screw Plating: Zinc with Non-Hexavalent Chromium
• Shield Size: Short
• Cable Exit Angle: 45°
• Cable Diameter (max.) (mm [in]): 25.40 [1.000]
• Shield Plating: Nickel
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Lead Free Status / RoHS Status: Compliant

26
Dimensions are shown for reference
purposes only.
M Series
Pin and Socket Connectors
Signal Contacts
Type III+, Crimp, Snap-In, Size 16
Precision formed pin and socket contacts in Size 16. They
are used in M Series, Special M Series, “G” Series,
Metrimate, Metrimate Drawer, and CPC Series 1 and 4
connectors. Contacts feature a high normal force which
provides a low resistance in significant applications such
as dry circuit signal conditions. Mating entry is closed-
ended to prevent damage from stubbing due to
misalignment. Stainless steel spring provides superior nor-
mal force and retention in the housing. AMP proprietary
gold plating process is designed so that specified plating
thicknesses are controlled on the inside of the socket,
which is the critical contact mating area. The contacts are
formed from brass. Single contact rating is 13 amperes at
30°C T-Rise.
See page 31 for product details.
Type III+, Solder Type, Size 16
As with the crimp snap-in Type III+, these precision formed
solder-type contacts are also used in M Series, Special
M Series, Metrimate, Metrimate Drawer, and CPC Series
1 and 4 connectors. Contacts feature a high normal force
which provides a low resistance in significant applications,
such as dry circuit conditions. A preformed wire barrel
accepts both stranded and solid wire, while the preformed
insulation barrel provides strain relief for various wire insu-
lation thicknesses. Mating entry is closed-ended to prevent
damage from stubbing due to misalignment. A stainless
steel spring provides superior normal force and retention
in the housing. AMP proprietary gold plating process is
designed so that specified plating thicknesses are con-
trolled on the inside of the socket, which is the critical
contact area. Single contact current rating is 13 amperes at
30°C Temperature Rise.
See pages 34 and 35 for product details.
Type III+, Solder Tab, Size 16
A companion contact style to the crimp snap-in and solder-
type, the Type III+ Solder Tab is compatible with the same
AMP connector families, and features high normal forces to
provide a low resistance in significant applications. A pre-
crimped solder tab with slot accepts various sizes of solid
and stranded wire. Mating entry is closed-ended to prevent
stubbing due to misalignment. A stainless steel spring pro-
vides superior normal force and retention in the housing.
AMP proprietary gold plating process is designed so that
specified plating thicknesses are controlled on the inside of
the socket, which is the critical contact area. Single contact
current rating is 13 amperes at 30°C Temperature Rise.
See page 35 for product details.
Dimensions are in inches and mil-
limeters unless otherwise specified.
Values in brackets are metric equiva-
lents.
Specifications subject to change.
Technical Support Center
1-800-522-6752
www.tycoelectronics.com
Catalog 82003
Revised 3-01