5787686-1 TE Connectivity, 5787686-1 Datasheet - Page 5

• Manufacturer Part Number: 5787686-1
• Description: D SUB CONNECTOR, STANDARD, 37POS, PLUG
• Manufacturer: TE Connectivity
• Type: D-Subminiaturer
• Series: AMPLIMITE HD-20r

Specifications of 5787686-1

• Number Of Contacts: 37POS
• Number Of Terminals: 37
• Plug / Receptacle: PIN
• Contact Plating: Gold Over Nickel
• Contact Pitch (mm): 2.77mm
• Body Orientation: Straight
• Mounting Style: Through Hole
• Number Of Ports: 1Port
• Number Of Contact Rows: 2
• Operating Temp Range: -55C to 105C
• Termination Method: Solder
• Housing Material: Polyester
• Contact Material: Phosphor Bronze
• Operating Voltage (max): 250VDC/250VAC
• Product Length (mm): 69.32mm
• Product Depth (mm): 12.55mm
• Product Height (mm): 12.42mm
• Connector Type: D Sub
• No. Of Contacts: 37
• D Sub Shell Size: DC
• Connector Body Material: Metal
• Gender: Plug
• Contact Termination: Through Hole
• Rohs Compliant: Yes
• Product: Standard Hoods & Connectors
• Number Of Positions / Contacts: 37
• Shell Plating: Tin
• Shell Size: 4
• Mounting Angle: Vertical
• Termination Style: Solder
• Features: Preloaded with size 20 DF posted pin contacts
• Flammability Rating: UL 94 V-0
• Number Of Rows: 2
• Pcb Mounting Orientation: Vertical
• Product Series: HD 20
• Mating Connector Lock: Without
• Pcb Mount Retention: With
• Shell Type: Front Metal Shell
• Grounding Indents: With
• Grounding Straps: Without
• Pcb Mount Style: Through Hole
• Color Code: None
• Sealed: No
• Profile: Standard
• Post Size (mm [in]): 0.66 [.026]
• Mounting Hole Diameter (mm [in]): 3.07 [.121]
• Shell Material: Steel
• Panel Mount Retention: Without
• Female Screwlock Material: Zinc
• Grounding Clips: Without
• Termination Post Length (mm [in]): 3.18 [0.125]
• Solder Tail Contact Plating: Tin over Nickel
• Number Of Positions: 37
• Pcb Mount Retention Type: 4-40 Retention Screwlocks
• Contact Plating, Mating Area, Material: Gold (30)
• Contact Shape: Round
• Contact Base Material: Brass
• Connector Style: Plug
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Pcb Thickness, Recommended (in [mm]): 0.062 [1.57]
• Application: Standard
• Lead Free Status / RoHS Status: Compliant

4.
4.1.
4.2.
4.3.
4.4.
Rev C
QUALITY ASSURANCE PROVISIONS
Qualification Testing
A.
B.
Requalification Testing
If changes significantly affecting form , fit or function are m ade to the product or m anufacturing process,
product assurance shall coordinate requalification testing, consisting of all or part of original testing
sequence as determ ined by developm ent/product, quality and reliability engineering.
Acceptance
Acceptance is based on verification that product m eets the requirem ents of Figure 1. Failures attributed
to equipm ent, test setup or operator deficiencies shall not disqualify the product. W hen product failure
occurs, corrective action shall be taken and sam ples resubm itted for qualification. Testing to confirm
corrective action is required before resubm ittal.
Certification
This product has been recognized under the Com ponent Recognition Program of Underwriter's Inc.,
Electrical File Num ber E-28476 and it has been Certified by the Canadian Standards Association
Num ber LR-16455.
Sam ple Selection
Connector housings and contacts shall be prepared in accordance with applicable Instruction
Sheets and shall be selected at random from current production. Test groups 1, 2, 3 and 5 shall
each consist of 5 m ated connector pairs with no grounding indents and shall be m ounted to a
printed circuit board. Test group 5 shall be m anufactured using 30 µin gold finish. Two wires shall
be used in each crim p. Test group 4 shall consist of 5 unm ated connectors using only a single wire
of the appropriate wire gage. Connectors shall be m ounted to a printed circuit board. Test group 6
and 7 shall each consist of 5 unm ated connectors. No m ounting required. Test group 8 shall
consist of 5 m ated connector pairs for positions 9 and 37. Connectors shall have grounding
indents. No m ounting is required.
Test Sequence
Qualification inspection shall be verified by testing sam ples as specified in Figure 2.
108-40025
5 of 7