66507-3 TE Connectivity, 66507-3 Datasheet - Page 3

• Manufacturer Part Number: 66507-3
• Description: CONTACT, PIN, 28-24AWG, CRIMP
• Manufacturer: TE Connectivity
• Type: Contactr
• Series: HDP-20r

Specifications of 66507-3

• Number Of Contacts: 1POS
• Number Of Terminals: 1
• Plug / Receptacle: PIN
• Contact Plating: Au over Pd Ni
• Contact Pitch (mm): Not Requiredmm
• Body Orientation: Straight
• Mounting Style: Cable
• Number Of Ports: 1Port
• Number Of Contact Rows: Not Required
• Operating Temp Range: -55C to 105C
• Termination Method: Crimp
• Current Rating: 3.7A
• Housing Material: Not Required
• Contact Material: Brass
• Operating Voltage (max): 250VAC
• Product Depth (mm): 1.52mm
• Connector Type: Contact, Crimp
• Contact Termination: Crimp
• Contact Type: Signal
• Rohs Compliant: Yes
• Contact Gender: Pin
• Product Type: Contact
• Product Series: HDP-20 (Crimp Snap)
• Termination Method To Wire/cable: Crimp
• Wire Insulation Diameter (mm [in]): 0.76 – 1.02 [0.030 – 0.040]
• Insulation Support: Yes
• Grade: Standard
• Contact Retention In Housing: Crimp Snap-In
• Solder Tail Contact Plating: Gold Flash over Nickel
• Pin Diameter (mm [in]): 1.02 [0.040]
• Wire Range (mm² [awg]): 0.08 - 0.20 [28-24]
• Used With: CPC Connectors, AMPLIMITE HDP-20
• Contact Base Material: Brass
• Contact Plating, Mating Area, Material: Gold Flash over Palladium Nickel or Gold (30) over Nickel
• Contact Size: 20
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Strip
• Lead Free Status / RoHS Status: Compliant
• For Use With: CPC Connectors, AMPLIMITE HDP-20

Tem perature rise vs current.
Vibration, random .
Mechanical shock.
Durability.
Mating force.
Unm ating force.
Contact insertion force.
Rev F
Test Description
30°C m axim um tem perature rise at
specified current.
No discontinuities of 1 m icrosecond
or longer duration.
See Note.
No discontinuities of 1 m icrosecond
or longer duration.
See Note.
See Note.
Size Posn
Size Posn
13.3 N [3 lbf] m axim um per contact. EIA-364-5.
1
2
3
4
5
1
2
3
4
5
15
25
37
50
15
25
37
50
9
9
Figure 1 (continued)
MECHANICAL
Requirem ent
12.5 [2.8]
20.9 [4.7]
34.7 [7.8]
51.6 [11.6] 177.9 [40]
69.4 [15.6] 195.7 [44]
12.5 [2.8]
20.9 [4.7]
34.7 [7.8]
51.6 [11.6] 177.9 [40]
69.4 [15.6] 195.7 [44]
(N [lbf] m axim um )
W ithout
(N [lbf] m axim um )
W ithout
Ground Indents
Ground Indents
133.4 [30]
146.8 [33]
164.6 [37]
133.4 [30]
146.8 [33]
164.6 [37]
W ith
W ith
EIA-364-70, Method 1.
Stabilize at a single current level
until 3 readings at 5 m inute intervals
are within 1°C.
See Figure 4.
EIA-364-28, Test Condition V,
Condition F.
Subject m ated specim ens to 20.71
G's rm s between 50 to 2000 Hz.
Fifteen m inutes in each of 3
m utually perpendicular planes.
See Figure 5.
EIA-364-27, Method A.
Subject m ated specim ens to 50 G's
half-sine shock pulses of 11
m illiseconds duration. Three shocks
in each direction applied along 3
m utually perpendicular planes, 18
total shocks.
See Figure 5.
EIA-364-9.
Mate and unm ate gold flash
specim ens for 100 cycles, and 30
ìin gold specim ens for 500 cycles
at a m axim um rate of 200 cycles
per hour.
EIA-364-13.
Measure force necessary to m ate
specim ens at a m axim um rate of
25.4 m m [1 in] per m inute.
EIA-364-13.
Measure force necessary to unm ate
specim ens at a m axim um rate of
25.4 m m [1 in] per m inute.
Measure force necessary to insert
contact into housing.
Procedure
108-40005
3 of 10