1658686-1 TE Connectivity, 1658686-1 Datasheet - Page 2

• Manufacturer Part Number: 1658686-1
• Description: D SUB CONTACT, SOCKET, 28-22AWG, CRIMP
• Manufacturer: TE Connectivity
• Type: Contactr
• Series: AMPLIMITE HDP-22r

Specifications of 1658686-1

• Number Of Contacts: 1POS
• Number Of Terminals: 1
• Plug / Receptacle: SKT
• Contact Plating: Gold
• Contact Pitch (mm): Not Requiredmm
• Body Orientation: Straight
• Mounting Style: Cable
• Number Of Ports: 1Port
• Number Of Contact Rows: Not Required
• Termination Method: Crimp
• Housing Material: Not Required
• Contact Material: Phosphor Bronze
• Product Length (mm): 14.73mm
• Product Depth (mm): 1.91mm
• Wire Size (awg): 28-22
• Contact Termination: Crimp
• Contact Type: Stamped & Formed
• Rohs Compliant: Yes
• Contact Gender: Socket
• Product Type: Contact
• Product Series: HDP-22 (Crimp Snap)
• Termination Method To Wire/cable: Crimp
• Wire Insulation Diameter (mm [in]): 0.76 – 1.02 [0.030 – 0.040]
• Insulation Support: Yes
• Grade: Standard
• Contact Retention In Housing: Crimp Snap-In
• Solder Tail Contact Plating: Tin over Nickel
• Wire Range (mm² [awg]): 0.08 - 0.40 [28-22]
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold (30)
• Contact Size: 22
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Strip
• Packaging Quantity: 20,000/Reel
• Lead Free Status / RoHS Status: Compliant
• For Use With: AMPLIMITE HDP-22

3.3.
3.4.
3.5.
Examination of product.
Termination resistance, specified
current.
Termination resistance, dry circuit.
Dielectric withstanding voltage.
Insulation resistance.
Temperature rise vs current.
Random vibration.
Rev B
Ratings
!
!
!
Performance and Test Description
Product is designed to meet the electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions.
Test Requirements and Procedures Summary
Test Description
Voltage: 250 volts AC
Current: Fully loaded and energized connectors
•
•
•
Temperature: -55 to 105°C
22 AWG: 1.9 amperes
26 AWG: 1.1 amperes
28 AWG: .95 amperes
Meets requirements of product
drawing and Application
Specification 114-10001.
15 milliohms maximum.
One minute hold with no breakdown
or flashover.
One milliampere maximum leakage
current.
5000 megohms minimum initial.
500 megohms minimum final.
30°C maximum temperature rise at
specified current.
See paragraph 3.3. at a maximum
ambient of 70°C.
No discontinuities of 1 microsecond
or longer duration.
See Note.
(AWG) (amperes) maximum)
Wire
Size
22
26
28
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirement
Current
Test
.95
1.9
1.1
Resistance
(milliohms
15
15
15
Visual, dimensional and functional
per applicable quality inspection
plan.
TE Spec 109-25.
Measure potential drop of mated
contacts assembled in housing,
Calculate resistance.
See Figure 3.
TE Spec 109-6-1.
Subject mated contacts assembled
in housing to 50 millivolt DC open
circuit at 100 milliamperes DC
maximum.
See Figure 3.
TE Spec 109-29-1.
1000 volts AC at sea level.
Test between adjacent contacts of
unmated specimens.
TE Spec 109-28-4.
Test between adjacent contacts of
unmated specimens.
TE Spec 109-45-1.
Measure temperature rise vs
current.
TE Spec 109-21-5, Test Level F.
Subject mated specimens to 20.71
G rms with 100 milliamperes current
applied. Twenty minutes in each of
3 mutually perpendicular planes.
See Figure 4.
Procedure
108-1268
2 of 8