193643-1 TE Connectivity, 193643-1 Datasheet - Page 23

• Manufacturer Part Number: 193643-1
• Description: CONTACT, SOCKET, 10AWG, CRIMP
• Manufacturer: TE Connectivity
• Type: Contactr
• Series: High Current Productsr

Specifications of 193643-1

• Gender: SKT
• Body Orientation: Straight
• Housing Material: Not Required
• Number Of Contacts: 1POS
• Number Of Ports: 1Port
• Number Of Terminals: 1
• Pitch (mm): Not Requiredmm
• Contact Material: Copper Alloy
• Voltage Rating Max: 600VAC
• Mounting Style: Cable
• Termination Method: Crimp
• Contact Plating: Gold
• Product Diameter (mm): 5.8mm
• Product Length (mm): 22.4mm
• Connector Type: Contact, Crimp
• Current Rating: 56A
• Contact Size: 8
• Rohs Compliant: Yes
• Contact Gender: Socket
• Insulation Support: No
• Termination Method To Wire/cable: Crimp
• Grade: Commercial
• Retention Clip Plating: Nickel
• High Current: Yes
• Wire Range (mm [awg]): 5.00-6.00² [10]
• Louvertac Band Material: Beryllium Copper
• Louvertac Band Plating: Gold (30)
• Retention Clip: With
• Retention Clip Material: Phosphor-Bronze
• Used With: Metrimate Connectors
• Contact Type: Socket
• Contact Classification: Power
• Contact Plating, Mating Area, Material: Gold (30)
• Contact Base Material: Copper Alloy
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Wire/Cable
• Test Current (a): 56.0
• Packaging Method: Loose Piece
• Lead Free Status / RoHS Status: Compliant
• For Use With: Metrimate Connectors

22
9 mm Pin Crimp Contact
The 9 mm Pin is designed to fit into the
2-Position Module. The Pin has a reten-
tion spring that locks the contact into the
housing cavity. The contacts are rear
installed and removed with the
Extraction Tool that is inserted in the
mating side. The contact can be crimped
with the indicated DYNA-CRIMP
69120-1 electric-hydraulic power unit.
Material
Body — Copper Alloy
Retention Spring — Beryllium
Copper
Finish
Body — Silver
9 mm Socket Crimp Contact
The 9 mm Socket is designed to fit into
the 2-Position Module. The Socket has
a retention spring that locks the contact
into the housing cavity. The Socket has
a polymer ring and post that helps pre-
vent any finger contact with bare metal
surfaces when installed into the Plug or
Receptacle housings. The contacts are
rear installed and removed with the
Extraction Tool that is inserted in the
mating side. The contact can be crimped
with the indicated DYNA-CRIMP
69120-1 electric-hydraulic power unit.
Material
Body — Copper Alloy
Retention Spring — B e ryllium Copper
Louvertac Band — Beryllium Copper
Post and Ring — Acetyl
Finish
Body — Silver
Dimensions are shown for reference
purposes only.
High Current Products
AMPOWER Multi Pin Plus Connector
*When used with other AMPOWER Multi Pin Plus Contacts.
Notes: 1. Additional wire sizes and mating levels available upon request.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets are
metric equivalents.
194041-6
Part
No.
2. Additional information on AMPOWER terminal hydraulic crimping is available in Catalog 82025.
194037-2
Part
No.
Current
Rating
(Amp)
150
Part No. 194041-6
Part No. 194037-2
Current
Rating
(Amp)
150
Sequence Level*
Louvertac Band
Pin
Socket
Third Mate
Contact
Specifications subject to change.
Use with
AWG
1/0
(Continued)
Use with
AWG
1/0
46766-2
Crimp
Post
Die
Tooling Part Numbers
46766-2
Crimp
Die
Crimp
69099
Head
Technical Support Center
1-800-522-6752
www.tycoelectronics.com
Tooling Part Numbers
Ring
Crimp
69099
Retention Spring
Head
Extraction
662725-1
Tool
Retention Spring
Catalog 65141
Extraction
Revised 4-01
662725-1
Tool