112628 Amphenol Connex, 112628 Datasheet - Page 4

• Manufacturer Part Number: 112628
• Description: connector, rf coaxial, bnc straight crimp jack, for belden 8281, 9231, 9141, 75 ohm
• Manufacturer: Amphenol Connex
• Type: BNCr

Specifications of 112628

• Gender: F
• Body Style: Straight
• Terminate To: Flexible Cable
• Mounting Style: Cable
• Termination: Crimp
• Operating Frequency: 0 to 1
• Body Plating: Nickel
• Contact Plating: Gold
• Contact Material: Phosphor Bronze
• Insulation Material: Teflon
• Body Material: Brass
• Product Length (mm): 33.6mm
• Impedance: 75Ohm
• Angle: Straight
• Application: Commercial
• Cable Type: RG-59/U
• Finish, Housing: Nickel
• Material, Dielectric: TFE
• Material, Housing: Brass
• Mating Type: Bayonet
• Primary Type: BNC
• Voltage, Rating: 500 V
• Lead Free Status / RoHS Status: Compliant

Note: These characteristics are typical but may not apply to all connectors.
75
Dielectric Withstanding Voltage
VSWR
MIL-C-39012 Contact Resistance
MIL-C-39012 Insulation Resistance 5,000 M
MIL-C 39012 Braid to Body
MIL-C-39012 RF Leakage
MIL-C-39012 Insertion Loss
Mechanical
Mating
Braid/Jacket Cable Affixment
Center Conductor Cable Affixment Crimps are crimp or solder; all other are solder only
Captivated Contacts
Cable Retention
Material
Male Contact
Female Contact
Other Metal Parts
Insulator
Crimp Ferrule
Environmental
Temperature Range
Weatherproof
Mermetic Seals
Shock
Vibration
Moisture Resistance
Corrosion
Temperature Cycling
Altitude
Military
MIL-C-39012
Electrical
Impedance
Frequency Range
Voltage Rating
Dielectric Withstanding Voltage
VSWR
Mechanical
Mating
Cable Affixment
Material
Body, Coupling Sleeve, Male Contact
Female Contact
Crimp Ferrule
Contact Plating
Insulator
BNC Specifications
1,500 volts rms
M39012 straight connectors: 1.3 max 0-4 GHz
M39012 right angle connectores: 1.35 max 0-4 GHz
Center contact: 1.5 m ; Outer contact: 0.2 m
0.1 milliohm
-55 dB min at 3 GHz
0.2 dB min at 3 GHz
2-stud bayonet coupling per M39012
All crimps are hex braid; clamps are screw-thread net and braid
clamp
All crimps unless specified otherwise
Crimps: 20-100 lbs; All others: 30-70 lbs
Brass
Beryllium copper or phosphorous bronze, silver or gold-plated
Brass, nickel finish; M39012 is silver finish
TFE, copolymer of styrene, glass-TFE (hermetically sealed)
Copper/brass
TFE insulators: - 65°C to + 165 °C
Copolymer of Styrene: - 55°C to + 85°C
Clamps with clamp gaskets; crimps with heat-shrink tubing
Pass helium leak test of 2x10
MIL-STD-202 method 202
MIL-STD-202 method 202, test condition D
MIL-STD-202 method 106
MIL-STD-202 method 101, test condition B
MIL-STD-202 method 102, test condition D
MIL-STD-202 method 105, test condition C
Where applicable
75 nominal
0-4 GHz
500 volts rms
1,500 volts rms
Type 1: 1.5+0.1 f(GHz) DC to 4 GHz
Type 2: 1.00+0.25 f(GHz) DC to 1 GHz
2-stud bayonet lock
Crimp-crimp
Brass
Beryllium copper or phosphorous bronze
Copper alloy
Gold
TFE, copolymer of styrene, glass-TFE (hermetically sealed)
-8
cc/second