PC357M15J00F Sharp Microelectronics, PC357M15J00F Datasheet - Page 10

• Manufacturer Part Number: PC357M15J00F
• Description: Transistor Output Optocouplers Photocoupler Mini-flat General
• Manufacturer: Sharp Microelectronics

Specifications of PC357M15J00F

• Maximum Fall Time: 18 us
• Maximum Input Diode Current: 50 mA
• Maximum Reverse Diode Voltage: 6 V
• Maximum Rise Time: 18 us
• Output Device: Phototransistor
• Output Type: DC
• Configuration: 1 Channel
• Input Type: DC
• Maximum Collector Emitter Voltage: 80 V
• Maximum Collector Emitter Saturation Voltage: 0.2 V
• Isolation Voltage: 3750 Vrms
• Current Transfer Ratio: 600 %
• Maximum Forward Diode Voltage: 1.4 V
• Maximum Collector Current: 50 mA
• Maximum Power Dissipation: 170 mW
• Maximum Operating Temperature: + 100 C
• Minimum Operating Temperature: - 30 C
• Package / Case: SMD-4
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

■ Manufacturing Guidelines
● Soldering Method
Reflow Soldering:
Flow Soldering :
Hand soldering
Other notices
Reflow soldering should follow the temperature profile shown below.
Soldering should not exceed the curve of temperature profile and time.
Please don't solder more than twice.
Due to SHARP's double transfer mold construction submersion in flow solder bath is allowed under the below
listed guidelines.
Flow soldering should be completed below 260˚C and within 10s.
Preheating is within the bounds of 100 to 150˚C and 30 to 80s.
Please don't solder more than twice.
Hand soldering should be completed within 3s when the point of solder iron is below 400˚C.
Please don't solder more than twice.
Please test the soldering method in actual condition and make sure the soldering works fine, since the impact
on the junction between the device and PCB varies depending on the tooling and soldering conditions.
(˚C)
300
200
100
0
0
Terminal : 260˚C peak
( package surface : 250˚C peak)
1
Preheat
150 to 180˚C, 120s or less
2
10
3
Reflow
220˚C or more, 60s or less
4
PC357NJ0000F Series
(min)
Sheet No.: D2-A00102EN