PC3SD11YTZCF Sharp Microelectronics, PC3SD11YTZCF Datasheet - Page 12

• Manufacturer Part Number: PC3SD11YTZCF
• Description: Triac & SCR Output Optocouplers 600V Low input drive 3mA Ift
• Manufacturer: Sharp Microelectronics

Specifications of PC3SD11YTZCF

• Isolation Voltage: 5000 Vrms
• Configuration: 1
• Maximum Continuous Output Current: 100 mA
• Maximum Input Current: 50 mA
• Maximum Operating Temperature: + 100 C
• Maximum Reverse Diode Voltage: 6 V
• Maximum Turn-on Time: 100 us
• Minimum Operating Temperature: - 30 C
• Output Type: AC
• Package / Case: PDIP-5
• Typical Input Voltage: 1.2 V
• Zero-crossing Circuit: No
• Output Device: Triac
• Peak Output Voltage (vdrm): 600 V
• Maximum Input Voltage: 1.4 V
• Maximum Output Voltage: 420 VAC
• Minimum Trigger Current: 5 mA (Max)
• No. Of Channels: 1
• Input Current: 20mA
• Output Voltage: 600V
• Opto Case Style: DIP
• No. Of Pins: 6
• Approval Bodies: CSA
• Approval Category: UL Recognised
• External Depth: 7.62mm
• External Length /: RoHS Compliant
• Optocoupler Output Type: Phototriac
• Svhc: No SVHC (15-Dec-2010)
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

● Cleaning instructions
● Presence of ODC
Solvent cleaning :
Ultrasonic cleaning :
Recommended solvent materials :
Solvent temperature should be 45˚C or below. Immersion time should be 3minutes or less.
The impact on the device varies depending on the size of the cleaning bath, ultrasonic output, cleaning time,
size of PCB and mounting method of the device.
Therefore, please make sure the device withstands the ultrasonic cleaning in actual conditions in advance of
mass production.
Ethyl alcohol, Methyl alcohol and Isopropyl alcohol.
In case the other type of solvent materials are intended to be used, please make sure they work fine in
actual using conditions since some materials may erode the packaging resin.
This product shall not contain the following materials.
And they are not used in the production process for this device.
Regulation substances : CFCs, Halon, Carbon tetrachloride, 1.1.1-Trichloroethane (Methylchloroform)
Specific brominated flame retardants such as the PBBOs and PBBs are not used in this product at all.
12
PC3SD11NTZ Series
Sheet No.: D2-A07501EN