CDB49300 Cirrus Logic Inc, CDB49300 Datasheet - Page 31

• Manufacturer Part Number: CDB49300
• Description: Audio Modules & Development Tools Eval Bd Mult-Std Aud Decdr. DSP
• Manufacturer: Cirrus Logic Inc

Specifications of CDB49300

• Description/function: Audio A/D
• Operating Supply Voltage: 5 V
• Product: Audio Modules
• For Use With/related Products: CS49300
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

4.
The CS492X requires a 3.3V digital power supply
for the digital logic within the DSP and a 3.3V
analog power supply for the internal PLL. There
are three digital power pins, VD1, VD2 and VD3,
along with three digital grounds, DGND1, DGND2
and DGND3. There is one analog power pin, VA
and one analog ground, AGND. The DSP will
perform at its best when noise has been eliminated
from the power supply. The recommendations
given
conditioning of the CS492X will help to ensure
reliable performance.
4.1 Decoupling
It is good practice to decouple noise from the
power supply by placing capacitors directly
between the power and ground of the CS492X.
Each
VD2/DGND, VD3/DGND, VA/AGND) should
have
recommended procedure is to place both a 0.1uF
DS262F2
POWER
its
pair
below
own
of
for
decoupling
power
decoupling
pins
capacitors.
(VD1/DGND,
and
power
The
and a 1uF capacitor as close as physically possible
to each power pin. The 0.1uF capacitor should be
closest to the device (typically 5mm or closer).
4.2 Analog Power Conditioning
In order to obtain the best performance from the
CS4923/4/5/6/7/8/9’s internal PLL, the analog
power supply (VA) must be as clean as possible. A
ferrite bead should be used to filter the 3.3V power
supply for the analog portion of the CS492X. This
power scheme is shown in the typical connection
diagrams.
4.3 Pads
Revision
incorporate 5V tolerant pads. This means that while
the CS492X power supplies require 3.3 volts, 5 volt
signals can be applied to the inputs without
damaging the part.
The I/O pads for Revision B of the CS4923/4/5/6
are not 5 volt tolerant. Input levels for revision B of
the CS4923/4/5/6 should be no greater than 3.3
D
and
CS4923/4/5/6/7/8/9
all
subsequent
revisions
31