MAX15053EVKIT+ Maxim Integrated Products, MAX15053EVKIT+ Datasheet - Page 3

• Manufacturer Part Number: MAX15053EVKIT+
• Description: Power Management Modules & Development Tools MAX15053 EVAL KIT MAX15053 EVAL KIT
• Manufacturer: Maxim Integrated Products

Specifications of MAX15053EVKIT+

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Table_1._Regulator_Enable_(EN)_Jumper_
JU1_Description
*Default position.
Table_2._Skip-Mode_Input_(SKIP)_Jumper_
JU2_Description
*Default position.
Table_3._R4_Pullup_Reference_Jumper_JU3_
Description
*Default position.
SHUNT_POSITION
SHUNT_POSITION
SHUNT_POSITION
Not installed*
Installed
1-2*
2-3*
2-3
1-2
________________________________________________________________________________________ _ 3
Connected to EN
Unconnected
SKIP_PIN
External user-supplied voltage
R4_PULLUP_REFERENCE
MAX15053_OUTPUT
On-board IN supply
Disabled
Enabled
Forced PWM
Skip-mode
operation
MODE
MAX15053 Evaluation Kit
The IC offers selectable skip-mode functionality to
reduce current consumption and achieve a higher effi-
ciency at light loads. To operate in skip mode, install a
shunt on jumper JU2. For normal operation, remove the
shunt from JU2. See Table 2 for JU2 shunt positions.
PGOOD is an open-drain output that asserts when
V
below 530mV (typ). On the EV kit, the PGOOD pad
is pulled up through resistor R4. The EV kit gives
the option to pull up PGOOD to the IN supply or a
user-supplied external voltage through configuration of
jumper JU3. See Table 3 for JU3 shunt positions.
FB
is above 555mV (typ), and asserts low if V
Skip-Mode Input (SKIP)
Power Good (PGOOD)
FB
is