LPC2478-STK-MICTOR Olimex Ltd., LPC2478-STK-MICTOR Datasheet - Page 10
![MCU, MPU & DSP Development Tools DEV BRD FOR LPC2478](/photos/15/90/159084/lpc2478-stk-4_sml.jpg)
LPC2478-STK-MICTOR
Manufacturer Part Number
LPC2478-STK-MICTOR
Description
MCU, MPU & DSP Development Tools DEV BRD FOR LPC2478
Manufacturer
Olimex Ltd.
Datasheet
1.LPC2478-STK-MICTOR.pdf
(28 pages)
Specifications of LPC2478-STK-MICTOR
Processor To Be Evaluated
LPC2478
Data Bus Width
16 bit, 32 bit
Interface Type
USB, I2C, SPI, UART
Dimensions
5.3 in x 4 in
Operating Supply Voltage
3.3 V
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
LPC2478-STK-MICTOR
Manufacturer:
Olimex Ltd.
Quantity:
135
JUMPER DESCRIPTION:
IrDA connector.
the on board LCD panel.
means that if you have only
the jumpers of both devices should be
If you have more than two devices, only the two end-
CAN_D
CAN_T
-10V_E
15V_E
3.3V_E
3.3VA_E
VREF_E
IRDA_LS_E
I2SRX_SDA
devices should be closed.
disabled.
Default state is open.
no IrDA
the on
the VDD1- 10 pins of the MCU.
Default state is opened if your board doesn't have an
voltage to the VREF pin of the MCU.
each end of
This jumper, when closed, supplies 3.3 V voltage to
the VDDA pin of the MCU.
This jumper, when closed, supplies 15 V voltage to to
This jumper, when closed, supplies -10 V voltage to
This jumper, when closed, supplies 3.3 V voltage to
Default state is closed.
IRDA_LowSpeed_Enable jumper – opened if there is
This jumper, when closed, supplies 3.3 V reference
Default state is closed.
This jumper assures correct work of the CAN. At
Default state is closed.
Default state is closed.
Default state is closed.
Default state is closed.
Page 10
CAN Disable. If this jumper is closed, the CAN is
board LCD panel.
module or it is disabled.
the bus it should be closed. This
two devices with CAN,
closed.