20-101-0504 Rabbit Semiconductor, 20-101-0504 Datasheet - Page 20

• Manufacturer Part Number: 20-101-0504
• Description: ACCY CABLE&MOUNTING HDWR SR9050
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-0504

• Accessory Type: Smart Star Cable
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: SR9500
• Other names: 101-0504; 101-0504; 101-504; 101-504

2.3 Programming Cable Connections
1. Connect the programming cable to the CPU Card.
Connect the 10-pin
Card as shown in Figure 4. Connect the other end of the programming cable to a COM
port on your PC. Note that COM1 on the PC is the default COM port in the Dynamic C
installation.
20
NOTE: Be sure to use the programming cable (Part No. 101-0513) supplied with the
NOTE: Never disconnect the programming cable by pulling on the ribbon cable.
NOTE: Some PCs now come equipped only with a USB port. It may be possible to use
Smart Star Tool Kit—the programming cable has red shrink wrap around the RS-232
converter section located in the middle of the cable. Programming cables from other
Rabbit kits are not designed to work with the Smart Star.
Carefully pull on the connector to remove it from the header.
an RS-232/USB converter (Part No. 20-151-0178) with the programming cable sup-
plied with the Tool Kit. Note that not all RS-232/USB converters work with Dynamic C.
PROG
Figure 4. Programming Cable Connections
connector of the programming cable to header J2 on the CPU
Smart Star (SR9000)