1-794627-6 TE Connectivity, 1-794627-6 Datasheet - Page 6

• Manufacturer Part Number: 1-794627-6
• Description: PLUG & SOCKET CONNECTOR, PLUG, 16POS 3MM
• Manufacturer: TE Connectivity
• Type: Powerr

Specifications of 1-794627-6

• Gender: HDR
• Body Orientation: Right Angle
• Housing Material: Nylon
• Number Of Contacts: 16POS
• Number Of Ports: 1Port
• Number Of Terminals: 16
• Current Rating (max): 5/ContactA
• Pitch (mm): 3mm
• Contact Material: Brass
• Operating Temp Range: -40C to 105C
• Voltage Rating Max: 250VAC
• Mounting Style: Surface Mount
• Termination Method: Solder
• Contact Plating: Tin-Lead Over Nickel
• Product Height (mm): 8.67mm
• Product Depth (mm): 15.63mm
• Peak Reflow Compatible (260 C): No
• Body Material: Nylon
• Leaded Process Compatible: No
• Mounting Type: Right-Angle PCB Surface Mount
• Connecting Termination: Surface Mount
• Rohs Compliant: No
• Product Type: Connector
• Connector Type: Header
• Mount Angle: Right Angle
• Mount: Printed Circuit Board
• Pcb Mount Alignment: With
• Product Line: Micro MATE-N-LOK
• Smt Holddown Plating: Tin-Lead
• Mating Retention Type: Latching
• Smt Holddown Material: Phosphor Bronze
• Voltage (vac): 250
• Current Rating (a): 5
• Solder Tail Contact Plating: Tin-Lead
• Number Of Positions: 16
• Number Of Rows: 2
• Row-to-row Spacing (mm [in]): 3.00 [0.118]
• Centerline (mm [in]): 3.00 [0.118]
• Pcb Mount Retention Type: SMT Hold Down
• Mating Retention: With
• Contact Type: Pin
• Contact Termination Type: Surface Mount
• Contact Layout: Double-Row
• Contact Plating, Mating Area, Material: Tin-Lead
• Contact Base Material: Brass
• Connector Style: Plug
• Housing Color: Black
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: Not ELV/RoHS compliant
• Lead Free Solder Processes: Not suitable for lead free processing
• Applies To: Printed Circuit Board
• Pcb Thickness, Recommended (mm [in]): 1.57 [0.062]
• Lead Free Status / RoHS Status: Not Compliant

4.
4.1.
4.2.
4.3.
4.4.
Rev D
QUALITY ASSURANCE PROVISIONS
Qualification Testing
A.
B.
Requalification Testing
If changes significantly affecting form, fit or function are made to the product or manufacturing process,
product assurance shall coordinate requalification testing, consisting of all or part of the original testing
sequence as determined by development/product, quality and reliability engineering.
Acceptance
Acceptance is based on verification that the product meets the requirements of Figure 1. Failures
attributed to equipment, test setup or operator deficiencies shall not disqualify the product. If product
failure occurs, corrective action shall be taken and specimens resubmitted for qualification. Testing to
confirm corrective action is required before resubmittal.
Quality Conformance Inspection
The applicable quality inspection plan shall specify the sampling acceptable quality level to be used.
Dimensional and functional requirements shall be in accordance with the applicable product drawing
and this specification.
Specimen Selection
Specimens shall be prepared in accordance with applicable Instruction Sheets and shall be
selected at random from current production. All test groups shall each consist of a minimum of 5
specimens.
Test Sequence
Qualification inspection shall be verified by testing specimens as specified in Figure 2.
108-1836
6 of 7