24VL024H/MS Microchip Technology, 24VL024H/MS Datasheet - Page 10

• Manufacturer Part Number: 24VL024H/MS
• Description: 2K, 256 X 8 SERIAL EE, 1.5V, 1/2 ARRAY WP 8 MSOP 3x3mm TUBE
• Manufacturer: Microchip Technology

Specifications of 24VL024H/MS

• Format - Memory: EEPROMs - Serial
• Memory Type: EEPROM
• Memory Size: 2K (256 x 8)
• Speed: 100kHz, 400kHz
• Interface: I²C, 2-Wire Serial
• Voltage - Supply: 1.5 V ~ 3.6 V
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 8-MSOP, Micro8™, 8-uMAX, 8-uSOP,
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

24VL024H
7.0
Since the device will not acknowledge during a write
cycle, this can be used to determine when the cycle is
complete (this feature can be used to maximize bus
throughput). Once the Stop condition for a Write
command has been issued from the master, the device
initiates the internally-timed write cycle and ACK polling
can be initiated immediately. This involves the master
sending a Start condition followed by the control byte
for a Write command (R/W = 0). If the device is still
busy with the write cycle, no ACK will be returned. If no
ACK is returned, the Start bit and control byte must be
re-sent. If the cycle is complete, the device will return
the ACK and the master can then proceed with the next
Read or Write command. See Figure 7-1 for a flow
diagram of this operation.
DS22109A-page 10
ACKNOWLEDGE POLLING
FIGURE 7-1:
Initiate Write Cycle
Send Control Byte
Write Command
with R/W = 0
Acknowledge
Condition to
Send Stop
(ACK = 0)?
Send Start
Did Device
Operation
Send
Next
ACKNOWLEDGE POLLING
FLOW
© 2008 Microchip Technology Inc.
Yes
No