ADG509FBRN Analog Devices Inc, ADG509FBRN Datasheet - Page 10

• Manufacturer Part Number: ADG509FBRN
• Description: Multiplexer IC
• Manufacturer: Analog Devices Inc
• Type: Analog Multiplexerr

Specifications of ADG509FBRN

• Peak Reflow Compatible (260 C): No
• No. Of Circuits: 4
• Leaded Process Compatible: No
• Mounting Type: Surface Mount
• No. Of Channels: 4
• Analog Multiplexer Type: Differential
• Package / Case: 16-SOIC
• Rohs Status: RoHS non-compliant
• Function: Multiplexer
• Circuit: 2 x 4:1
• On-state Resistance: 400 Ohm
• Voltage Supply Source: Single Supply
• Voltage - Supply, Single/dual (±): 15V
• Current - Supply: 0.1µA
• Operating Temperature: -40°C ~ 85°C
• Multiplexer Configuration: Single 4:1
• Number Of Inputs: 8
• Number Of Outputs: 2
• Number Of Channels: 1
• Analog Switch On Resistance: 350@±15VOhm
• Analog Switch Turn On Time: 250ns
• Analog Switch Turn Off Time: 250ns
• Package Type: SOIC N
• Power Supply Requirement: Dual
• Single Supply Voltage (min): Not RequiredV
• Single Supply Voltage (typ): Not RequiredV
• Single Supply Voltage (max): Not RequiredV
• Dual Supply Voltage (typ): ±15V
• Dual Supply Voltage (max): ±22V
• Power Dissipation: 3.3mW
• Supply Current: 0.2@±15VmA
• Mounting: Surface Mount
• Pin Count: 16
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

ADG508F/ADG509F/ADG528F
TERMINOLOGY
V
Most Positive Power Supply Potential.
V
Most Negative Power Supply Potential.
GND
Ground (0 V) Reference.
R
Ohmic Resistance between D and S.
R
Change in R
Celsius.
R
Difference between the R
I
Source leakage current when the switch is off.
I
Drain leakage current when the switch is off.
I
Channel leakage current when the switch is on.
V
Analog Voltage on Terminals D, S.
C
Channel input capacitance for off condition.
C
Channel output capacitance for off condition.
C
On Switch Capacitance.
C
Digital Input Capacitance.
S
D
D
ON
ON
ON
S
D
D
IN
DD
SS
D
, I
(OFF)
(OFF)
, C
(OFF)
(V
(OFF)
S
Drift
Match
(ON)
S
S
)
(ON)
ON
when temperature changes by one degree
ON
of any two channels.
Rev. E | Page 10 of 20
t
Delay time between the 50% and 90% points of the digital input
and switch on condition.
t
Delay time between the 50% and 90% points of the digital input
and switch off condition.
t
Delay time between the 50% and 90% points of the digital
inputs and the switch on condition when switching from one
address state to another.
t
“OFF” time measured between 80% points of both switches
when switching from one address state to another.
V
Maximum input voltage for Logic 0.
V
Minimum input voltage for Logic 1.
I
Input current of the digital input.
Off Isolation
A measure of unwanted signal coupling through an off channel.
Charge Injection
A measure of the glitch impulse transferred from the digital
input to the analog output during switching.
I
Positive Supply Current.
I
Negative Supply Current.
ON
OFF
TRANSITION
OPEN
INL
DD
SS
INL
INH
(EN)
(I
(EN)
INH
)