EVAL-AD5392EBZ Analog Devices Inc, EVAL-AD5392EBZ Datasheet - Page 3
![no-image](/images/manufacturer_photos/0/0/57/analog_devices_inc_sml.jpg)
EVAL-AD5392EBZ
Manufacturer Part Number
EVAL-AD5392EBZ
Description
Evaluation Board I.c.
Manufacturer
Analog Devices Inc
Specifications of EVAL-AD5392EBZ
Number Of Dac's
16
Number Of Bits
14
Outputs And Type
16, Single Ended
Sampling Rate (per Second)
125k
Data Interface
Serial
Settling Time
8µs
Dac Type
Voltage
Voltage Supply Source
Single
Operating Temperature
-40°C ~ 85°C
Utilized Ic / Part
AD5392
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
LINK AND SWITCH OPTIONS
The link and switch options on the evaluation board should be set for the required operating setup before using the board. The functions
of the link and switch options are described in Table 1.
Table 1. Link Options
Link/Switch No.
LK1
LK2
LK3
LK4
LK5
LK6
S1
S2
S3
Function
For normal operation, this link should not be inserted.
When this link is inserted, it connects the RESET pin to DGND, resetting the AD539x.
For normal operation, this link should not be inserted.
When this link is inserted, it connects the CLR pin to DGND, clearing the outputs of the AD539x to the user-
programmed value.
This link selects the state of LDAC.
When inserted, LDAC is connected to DGND and , therefore, the DACs update automatically.
When removed, LDAC is connected to DV
When this link is inserted, it connects the AV
monitored using the on-board ADC.
When this link is inserted, it connects the reference pin of the AD539x to the MON_IN2 pin, so that the reference value
can be monitored using the on-board ADC.
This pin selects the reference.
Position A selects the externally applied reference at J4.
Position B selects the on-board 2.5 V reference.
This pin selects the power-down state.
Position H powers down the AD539x.
Position L removes the AD539x from power-down.
This switch selects the interface.
Position H selects the SPI interface.
Position L selects the I
In I
Position H sets A1 = 1.
Position L sets A1 = 0.
Position H enables daisy-chain mode.
Position L disables daisy-chain mode.
In SPI mode, this switch selects the state of daisy-chain mode.
2
C mode, this switch selects the state of the Address Bit A1.
2
C interface.
Rev. 0 | Page 3 of 12
CC
and must be brought low by the digital interface to update the DACs.
CC
pin of the AD539x to the MON_IN1 pin, so that the AV
EVAL-AD5390/91/92EB
CC
value can be