KSZ8842-PMQLI Micrel Inc, KSZ8842-PMQLI Datasheet - Page 110

• Manufacturer Part Number: KSZ8842-PMQLI
• Description: 2-Port Ethernet Switch/Repeater + 32-bit/33MHz PCI Bus Interface, Ind Temp ( )
• Manufacturer: Micrel Inc

Specifications of KSZ8842-PMQLI

• Controller Type: Ethernet Switch Controller
• Interface: PCI
• Voltage - Supply: 3.1 V ~ 3.5 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 128-MQFP, 128-PQFP
• Number Of Primary Switch Ports: 2
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: Yes
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII
• Power Supply Type: Analog/Digital
• Package Type: PQFP
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Pin Count: 128
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.5V
• Operating Supply Voltage (min): 3.1V
• Operating Temperature Classification: Industrial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 576-1636 - BOARD EVALUATION KSZ8842-PMQL
• Current - Supply: -
• Lead Free Status / RoHS Status: Compliant, Lead free / RoHS Compliant
• Other names: 576-2121; KSZ8842-PMQLI

Micrel, Inc.
Notes:
1. Exceeding the absolute maximum rating may damage the device. Stresses greater than those listed in the table above may cause permanent
2. The device is not guaranteed to function outside its operating rating. Unused inputs must always be tied to an appropriate logic voltage level
3. No (HS) heat spreader in this package. The thermal junction to ambient (θ
4. Specification for packaged product only. A single port’s transformer consumes an additional 45mA at 3.3V for 100BASE-T and 70mA at 3.3V for
October 2007
10BASE-T.
damage to the device. Operation of the device at these or any other conditions above those specified in the operating sections of this specification
is not implied. Maximum conditions for extended periods may affect reliability. Unused inputs must always be tied to an appropriate logic voltage
level.
(Ground to V
DD
)
110
JA
) and the thermal junction to case (θ
JC
) are under air velocity 0m/s.
KSZ8842-PMQL/PMBL
M9999-100207-1.5