A10113-81 Laird Technologies, A10113-81 Datasheet - Page 2

• Manufacturer Part Number: A10113-81
• Description: TGARD 210 A1, 14X16"
• Manufacturer: Laird Technologies

Specifications of A10113-81

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: Q6040093

Innovative Technology
for a Connected World
Standard thicknesses:
Standard sheet sizes:
Pressure sensitive adhesive:
Reinforcement:
Data for design engineer guidance only. Observed performance varies in application. Engineers are reminded to test the material in application.
Construction &
Composition
Color
Thickness
Thickness tolerance
Specific Gravity (Density)
Hardness
Tensile Strength
% Elongation
Outgassing TML (Post Cured)
Outgassing CVCM (Post Cured )
UL Flammability Rating
Temperature Range
Thermal Conductivity
Thermal Impedance
@ 100 psi
@ 689 KPa
Breakdown Voltage
Volume Resistivity
Dielectric Constant @ 1 MHz
THR-SPEC-T-GARD-200 0109
Our customers are reminded that they bear the responsibility for testing Laird Technologies’ materials for their proposed use. Any information furnished by Laird Technogies and its agents is be-
lieved to be accurate and reliable, but our customers must bear all responsibility for the use and application of Laird Technologies’ materials since Laird Technologies’and its agents cannot be aware
of all potential use. Laird Technologies makes no warranties as to the fitness, merchantability, or suitability of any Laird Technologies’materials or products for any specific or general uses. Laird
Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies’ products are sold pursuant to the Laird Technologies’ domestic terms and conditions of
sale in effect from time to time, a copy of which will be furnished upon request. A15561-00 Rev A, 2/05/07
© 2009 All Rights Reserved. Laird Technologies is a registered trademark of Laird Technologies, Inc.
Reinforced boron nitride
filled silcone elastomer
±0.002” (±0.05mm)
0.010” (0.25mm)
Thermally Conductive Insulators
T-GARD
5x10 13 ohm-cm
-60ºC to 200ºC
1.17°C-cm²/W
0.18°C-in²/W
85 Shore A
6,000 VAC
1.52 g/cc
0.06%
5 W/mK
0.05%
White
94 V0
3.32
N/A
N/A
TM
0.010” (0.25mm), 0.020” (0.51mm), 0.030” (0.76mm)
Please contact Laird Technologies for alternate thicknesses.
0.010”: 14” x 16” (356mm x 406mm), 0.020” and 0.030”: 8” x 8” (203mm x 203mm) and
16” x 16” (406mm x 406mm)
Individual die-cut shapes can be supplied.
Request no adhesive with “AO” suffix. Request adhesive on one side with “A1” suffix.
Double-sided adhesive is not available.
T-gard
210
TM
200 sheets are fiberglass reinforced.
Reinforced boron nitride
T-gard
filled silcone elastomer
±0.002” (±0.05mm)
0.020” (0.51mm)
5x10 13 ohm-cm
T-GARD
-60ºC to 200ºC
2.26°C-cm²/W
0.35°C-in²/W
10,000 VAC
80 Shore A
1.45 g/cc
5 W/mK
0.06%
0.05%
94 V1
Blue
3.32
N/A
N/A
TM
220
TM
Reinforced boron nitride
filled silcone elastomer
±0.003” (±0.075mm)
200 Series
0.030” (0.76mm)
5x10 13 ohm-cm
T-GARD
-60ºC to 200ºC
2.28°C-cm²/W
0.40°C-in²/W
20,000 VAC
80 Shore A
Not Rated
1.47 g/cc
5 W/mK
0.06%
0.05%
Green
3.32
N/A
N/A
TM
230
ASTM D2240
ASTM D5470
ASTM D5470
ASTM D412
ASTM D412
ASTM E595
ASTM E595
ASTM D149
ASTM D257
ASTM D150
Pycnometer
METHOD
(modified)
(modified)
E180840
Helium
Visual
TEST