MTCBA-E1-EN2 Multi-Tech Systems, MTCBA-E1-EN2 Datasheet - Page 5

• Manufacturer Part Number: MTCBA-E1-EN2
• Description: ROUTER WIRELESS QUAD E-GPRS
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® rCellr

Specifications of MTCBA-E1-EN2

• Function: Transceiver, EDGE, Router
• Modulation Or Protocol: GPRS
• Frequency: 850MHz, 900MHz, 1.8GHz, 1.9GHz
• Applications: General Purpose
• Interface: RJ-45, RS-232
• Voltage - Supply: 9 V ~ 32 V
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1070

Insert SIM Card, If required
It also requires a SIM card (Subscriber Identity Module) to operate on a GSM
network. To install the SIM, do the following:
Connect the Antenna and Power
Multi-Tech Systems, Inc. Quick Start Guide
The MultiModem requires the power supply connection to begin operation.
1.
2.
3.
1.
Using a small Phillips screwdriver, remove the two SIM door screws
and remove the SIM door.
Insert the SIM card into the card holder. The above graphic illustrates
the correct SIM card orientation.
Verify that the SIM card fits into the holder properly and then replace
the cover.
Note:
unit.
Connect a suitable antenna to the SMA connector (see antenna
specifications in Appendix B of the User Guide).
Optional:
antenna to the GPS connector. Ensure that when you position the
GPS antenna, that it can see the sky to locate the satellites for
accurate values.
When changing a SIM, ensure that power is removed from the
MTCBA-XX-EN2
If you have the GPS version, connect a suitable GPS
MultiModem rCell Intelligent Wireless Router
MTCBA-XX-EN2-GP
5