MTCMR-H4-P1-NAM Multi-Tech Systems, MTCMR-H4-P1-NAM Datasheet - Page 92

• Manufacturer Part Number: MTCMR-H4-P1-NAM
• Description: MODEM CELLULAR QUAD GPRS HSPA
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® iCellr

Specifications of MTCMR-H4-P1-NAM

• Function: Transceiver, HSPA, Modem
• Modulation Or Protocol: GPRS, GSM, EDGE
• Frequency: 850MHz, 900MHz, 1.8GHz, 1.9GHz
• Applications: General Purpose
• Interface: RS-232, USB
• Data Rate - Maximum: 7.2 Mbps
• Features: US Power Cord
• Voltage - Supply: 9 V ~ 32 V, USB
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1123

High Speed HSPA-H4 AT Commands Reference Guide (Document S000483A)
<Guaranteed bitrate DL>
<Delivery order>
<Maximum SDU size>
<SDU error ratio>
<Residual bit error ratio>
<Delivery of erroneous SDUs>
<Transfer delay>
This parameter indicates the guaranteed number of kbits/s delivered by UMTS
(down-link traffic) at a SAP (provided that there is data to deliver). As an example a
bitrate of 32kbit/s would be specified as 32
(e.g., AT+CGEQMIN=...,32,...).
0
1...16000
This parameter indicates whether the UMTS bearer shall provide in-sequence SDU
delivery or not.
0
1
2
This parameter indicates the maximum allowed SDU size in octets.
0
10...1520
This parameter indicates the target value for the fraction of SDUs lost or detected as
erroneous. SDU error ratio is defined only for conforming traffic. The value is
specified as “mEe”. As an example a target SDU error ratio of 5*10-
specified as “5E3” (e.g., AT+CGEQMIN=...,”5E3”,...).
“0E0“
“1E2“
“7E3“
“1E3“
“1E4“
“1E5“
“1E6“
“1E1“
This parameter indicates the target value for the undetected bit error ratio in the
delivered SDUs. If no error-detection is requested, residual bit error ratio indicates
the bit error ratio in the delivered SDUs. The value is specified as “mEe”. As an
example, a target residual bit error ratio of 5*10-3 would be specified as “5E3”
(e.g., AT+CGEQMIN=...,”5E3”,...).
“0E0“
“5E2“
“1E2“
“5E3“
“4E3“
“1E3“
“1E4“
“1E5“
“1E6“
“6E8“
This parameter indicates whether SDUs detected as erroneous shall be delivered or
not.
0
1
2
3
This parameter indicates the targeted time between request to transfer an SDU at
one SAP to its delivery at the other SAP, in milliseconds.
no
yes
Default. subscribed value.
Default. subscribed value.
no
yes
no detect
Default. Subscribed value.
Default. Subscribed value
(value needs to be divisible by 10 without remainder)
Default. subscribed value.
Default. subscribed value.
Chapter 3 – Supported GSM/WCDMA AT Commands
3
would be
92