MTCBA-H4-EN2-P1-GB/IE Multi-Tech Systems, MTCBA-H4-EN2-P1-GB/IE Datasheet - Page 31
![no-image](/images/no-image-200.jpg)
MTCBA-H4-EN2-P1-GB/IE
Manufacturer Part Number
MTCBA-H4-EN2-P1-GB/IE
Description
ROUTER WIRELESS QUAD HSPA
Manufacturer
Multi-Tech Systems
Series
MultiModem® rCellr
Datasheets
1.SF100-G.pdf
(4 pages)
2.MTCMR-E1.pdf
(16 pages)
3.MTCMR-E1.pdf
(79 pages)
4.MTCMR-H4-P1.pdf
(147 pages)
5.MTCBA-H4-EN2-P2.pdf
(2 pages)
Specifications of MTCBA-H4-EN2-P1-GB/IE
Function
Transceiver, HSPA, Router
Modulation Or Protocol
GPRS, GSM, EDGE
Frequency
850MHz, 900MHz, 1.8GHz, 1.9GHz
Applications
General Purpose
Interface
RJ-45, RS-232
Features
UK Power Cord
Voltage - Supply
9 V ~ 32 V
Package / Case
Module
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
881-1093
IP Setup > GPS Configuration
An rCell unit with a –GP build option enables the GPS Configuration. The –GP option allows you to configure forwarding of
NMEA (National Marine Electronics Association) sentences from the built in GPS receiver to a device connected to the serial
port or over the network to a remote host. The TCP Server, TCP/UDP Client and Serial Port Dump can be enabled
simultaneously. All enabled sentences will be forwarded periodically using the interval specified in the NMEA Configuration
section. Before forwarding, the rCell prepends an ID Prefix and ID to each enabled NMEA sentence. The NMEA sentences
available are those provided by the built in receiver which are: GPGGA, GPGSA, GPGSV, GPGLL, GPRMC, GPVTG. Detailed
descriptions of the supported NMEA sentences are provided in the Universal IP AT Commands Reference Guide provided on
your product CD.
Local Configuration
The Local Configuration allows you to configure the TCP server port and allows for a serial port dump.
Remote Configuration
The Remote Configuration allows the device to connect to a remote server using the IP and port information for uploading GPS
data.
NMEA Configuration
The NMEA Configuration allows you to configure the time interval, any additional prefix or ID information and forward NMEA
sentences.
Multi-Tech Systems, Inc. MultiModem rCell User Guide
Password
Serial Port Dump
Password
TCP Server
Port
TCP/UDP Client
Remote Host
Interval
Add ID Prefix
Add ID
If a password is supplied, the TCP server will request that the remote client supply a password before
sending the NMEA sentences.
Enable/disable the Serial Port. The default is Disable. The serial port configuration settings will be
used to configure the port. The serial port client/server must be disabled in order to use the serial port
for GPS.
response.
Enable/disable TCP Server. The default is Disable.
Sets the port on which the server is listening. The default is 5445. The port range is from 1 to 5 digits,
each digit between 0 and 9 inclusive. Note that numbers above 65,535 are illegal as the port
identification fields are 16 bits long in the TCP header.
Enable/disable the TCP/UDP Client and defines the protocol of the client. The defaults are Disable
and TCP.
Displays the IP address and port number of the Remote Host.
If the Remote Host requests a password, the password entered here will be sent to the server in
The Interval is defined in seconds. The default is 10 seconds. The interval range is from one to 255
seconds.
The ID Prefix is 0 to 10 character prefix prepended to the ID.
The ID is an unique remote asset identification string. The ID string can be any length up to 20
characters, except that the & and $ are invalid characters. The ID must follow the standard NMEA
sentence structure. Refer to the Universal IP AT Commands Reference Guide provided on your
product CD for sentence structure.
Chapter 4 – Using the Web Management Software
31