MTCBA-E-EN Multi-Tech Systems, MTCBA-E-EN Datasheet - Page 7
MTCBA-E-EN
Manufacturer Part Number
MTCBA-E-EN
Description
MODEM EDGE ETHERNET QUAD DC PWR
Manufacturer
Multi-Tech Systems
Series
MultiModem® EDGEr
Specifications of MTCBA-E-EN
Function
Transceiver, EDGE, Modem
Modulation Or Protocol
EDGE
Frequency
850MHz, 900MHz, 1.8GHz, 1.9GHz
Applications
General Purpose
Interface
RJ-45 Ethernet
Data Rate - Maximum
240 kbps
Voltage - Supply
5V
Package / Case
Module with Case
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Set Your PC’s TCP/IP Address for
Ethernet Functionality
Multi-Tech Systems, Inc. Quick Start Guide
After the wireless account is established and the device is
properly connected, set up the TCP/IP address on your PC, if
not previously set.
1.
2.
3.
4.
Open the PC's Control Panel.
Select Networks or Network Connections.
Under Protocols, select TCP/IP.
Under Properties, choose one of the following:
MultiModem Wireless Modem with Ethernet Interface
Fused DC Power Connection
•
cable to the DC power source on
the vehicle or machine in which
you are mounting the modem. Be
sure the GND connection is
correct.
•
and black wire to – (negative).
Note:
according to the type of
application, you can use
permanent “+” or key-switched
“+”. Connect the power supply to
its source (for example, in a
mobile situation, to the vehicle’s
DC fuse/terminal block).
Warning:
is provided on the device. To
ensure complete protection, you
may want to add additional
filtering to the DC input.
Connect the fused DC power
Connect red wire to + (positive)
For automotive application:
Over-voltage protection
7