MTCBA-E-EN-EU Multi-Tech Systems, MTCBA-E-EN-EU Datasheet - Page 7

• Manufacturer Part Number: MTCBA-E-EN-EU
• Description: MODEM EDGE ETHERNET QUAD EURO
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® EDGEr

Specifications of MTCBA-E-EN-EU

• Function: Transceiver, EDGE, Modem
• Modulation Or Protocol: EDGE
• Frequency: 850MHz, 900MHz, 1.8GHz, 1.9GHz
• Applications: General Purpose
• Interface: RJ-45 Ethernet
• Data Rate - Maximum: 240 kbps
• Features: Euro Power Cord
• Voltage - Supply: 5V
• Package / Case: Module with Case
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Set Your PC’s TCP/IP Address for
Ethernet Functionality
Multi-Tech Systems, Inc. Quick Start Guide
After the wireless account is established and the device is
properly connected, set up the TCP/IP address on your PC, if
not previously set.
1.
2.
3.
4.
Open the PC's Control Panel.
Select Networks or Network Connections.
Under Protocols, select TCP/IP.
Under Properties, choose one of the following:
MultiModem Wireless Modem with Ethernet Interface
Fused DC Power Connection
•
cable to the DC power source on
the vehicle or machine in which
you are mounting the modem. Be
sure the GND connection is
correct.
•
and black wire to – (negative).
Note:
according to the type of
application, you can use
permanent “+” or key-switched
“+”. Connect the power supply to
its source (for example, in a
mobile situation, to the vehicle’s
DC fuse/terminal block).
Warning:
is provided on the device. To
ensure complete protection, you
may want to add additional
filtering to the DC input.
Connect the fused DC power
Connect red wire to + (positive)
For automotive application:
Over-voltage protection
7