EKL3104 Panasonic Electric Works, EKL3104 Datasheet - Page 8

• Manufacturer Part Number: EKL3104
• Description: D-IMAGER 3D IMAGE SENSOR
• Manufacturer: Panasonic Electric Works
• Series: D-Imagerr
• Type: Image Sensorr

Specifications of EKL3104

• Featured Product: D-Imager
• Active Pixel Array: 160H x 120V
• Frames Per Second: 20
• Voltage - Supply: 17.1 V ~ 25.2 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Pixel Size: -
• Package / Case: -
• Other names: 255-3037; 3D IMAGER

M3 screw (included)
■Wiring Fixation Cramp Installation Method
■Fall Prevention Wire Installation Method
connectors.
1) Plug-in the USB and power supply connector into the sensor unit.
Use the wiring fixation cramp to prevent disconnection of the USB and power supply
2) Cross the cables and attach the wiring fixation cramp at the intersection.
※Avoid over-bending the cables during fixation. It may cause disconnections in the cable,
Always use the fall prevention wire to avoid falls when installing the sensor unit in high places.
1) Wrap the wire around a secure place (that could stop a fall) and
2) Attach the ring that went through the other to the gutter located at the upper-left
3) Place the provided washer above it and fix it with the provided M3 screw.
※The fall prevention wire’s length is 50cm. Always ensure the sensor unit is fixed
Please work with care in high place.
Wiring fixation cramp (included)
resulting in smoke emissions or result in a fire.
Washer (included)
Use the provided M3 screw to fix the cramp to the sensor unit.
insert one extremity’s ring into the other.
of the sensor unit.
(Do not press down too strongly the washer on the wire. It might result in a
in a safe position and adjust the length accordingly.
rupture of the wire.)
Power supply
M3 screw
(included)
Fall prevention wire
(included)
PC
Fall prevention wire fixation
Screw for wiring fixation
cramp set-up (included)
8/15