CYII5FM1300AB-QDC Cypress Semiconductor Corp, CYII5FM1300AB-QDC Datasheet - Page 25

• Manufacturer Part Number: CYII5FM1300AB-QDC
• Description: SENSOR IMAGE 1.3MP CMOS 84-LCC
• Manufacturer: Cypress Semiconductor Corp
• Type: CMOS Imagingr

Specifications of CYII5FM1300AB-QDC

• Pixel Size: 6.7µm x 6.7µm
• Active Pixel Array: 1280H x 1024V
• Frames Per Second: 27
• Voltage - Supply: 3 V ~ 4.5 V
• Package / Case: 84-LCC
• Sensor Image Color Type: Monochrome
• Sensor Image Size Range: >= 480,000Pixels
• Sensor Image Size: 1280x1024Pixels
• Operating Supply Voltage (min): 3V
• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (max): 3.6V
• Operating Temp Range: 0C to 65C
• Package Type: CLCC
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 84
• Package: 84CLCC
• Image Size: 1280x1024 Pixels
• Color Sensing: Monochrome
• Operating Temperature: 0 to 65 °C
• Operating Supply Voltage: 3 to 3.6 V
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Windowing in Y-Direction
Reapply the Y_START pulse after loading a new Y-pointer value
into the YL_REG and YR_REG registers to load a new Y-pointer
into the Y-shift-register.
Every time a Y_START pulse appears, a frame calibration of the
output amplifier occurs.
Document #: 38-05710 Rev. *H
Figure 28. Windowing in Y-Direction
Initialization (Startup Behavior)
To avoid any high current consumption at startup, apply the
SYS_CLOCK signal as soon as possible after or even before
power on of the image sensor. After power on, apply
SYS_RESET for a minimum of five SYS_CLOCK periods to
ensure a proper reset of the on-chip sequencer and timing
circuitry. All internal registers are set to ‘0’ after SYS_RESET is
applied.
Because all the IBIS5-B-1300 control signals are active high,
apply a low level (before SYS_RESET occurs) to these pins at
start up to avoid latch up.
CYII5SM1300AB
Page 25 of 35
[+] Feedback