8846A 120V Fluke Electronics, 8846A 120V Datasheet - Page 71
![PREC MLTMTR 6.5 DIGI RES USB MEM](/photos/27/4/270437/8846a_dmm_sml.jpg)
8846A 120V
Manufacturer Part Number
8846A 120V
Description
PREC MLTMTR 6.5 DIGI RES USB MEM
Manufacturer
Fluke Electronics
Type
Digital (DMM)r
Specifications of 8846A 120V
Includes
Test Leads
Style
Bench
Display Digits
6.5
Display Type
VFD, Dual
Display Count
Varies
Function
Voltage, Current, Resistance, Capacitance, Temperature, Frequency
Functions, Extra
Continuity, dB, Diode Test
Features
Memory, RS-232, USB Port
Ranging
Manual
Response
Average
Lead Free Status / RoHS Status
Contains lead / RoHS compliant by exemption
Other names
2454021
614-1002
614-1002
Introduction
Selecting Function Modifiers
Activating the Secondary Display
This chapter covers the steps for making a measurement with each of the Meter’s
functions. These steps include making a proper and safe connection between the Meter
and the circuit, as well as the manipulation of the front-panel controls to display the
selected measurement.
If you are unfamiliar with the front-panel controls, review the relevant sections in
Chapter 3.
Most of the functions described in this Chapter will have choices for changing how the
measured value is displayed or how the input signal is processed. These “Function
Modifiers” appear in the bottom line of the display as soft key labels. The available
selections are dependent on the selected function and are described in the Meter function
descriptions provided in this Chapter.
For most of the Meter’s functions, an additional measured parameter may appear in the
display. These additional parameters are available when 2ND MEAS appears over one
of the soft keys.
The secondary measurement may be another parameter of the primary signal (e.g., ac
voltage and frequency of one signal), or a measurement of another signal made
simultaneously with the primary signal (e.g., dc voltage and dc current).
The range of the secondary display is always automatically controlled.
To select a secondary measurement:
1. Press the soft key labeled 2ND MEAS.
To avoid possible electrical shock, and/or damage to the Meter,
When switching between Meter functions, the secondary display selection
for the function you last selected is deactivated the next time that function is
selected.
Each additional press of this soft key will cause the secondary display to cycle
through the available measurements. After the last secondary measurement is shown,
the next press of this soft key turns the secondary display off.
Read the safety information found in Chapter 1 before
operating this meter.
Do not apply more than 1000 volts between any terminal
and earth ground.
XW Warning
Note
Making Measurements
Introduction
4-3