100 TPI (Test Products Int), 100 Datasheet - Page 5

• Manufacturer Part Number: 100
• Description: DMM AUTO RANGE W/BOOT
• Manufacturer: TPI (Test Products Int)
• Series: 100r
• Type: Digital (DMM)r

Specifications of 100

• Includes: Battery, Test Leads
• Style: Handheld
• Display Digits: 3.75
• Display Type: LCD
• Display Count: 4000
• Function: Voltage, Resistance
• Ranging: Auto
• Response: Average
• Lead Free Status / RoHS Status: Vendor undefined / Vendor undefined
• Functions, Extra: -
• Features: -
• Other names: 290-1920

MEASURING AC/DC VOLTAGE
Measurement Procedure:
1. Disconnect power to circuit to be
2. Plug black test lead into the COM input jack.
3. Plug the red test lead into the V/ W input
4. Set the rotary switch to the “ON” position.
5. Connect test leads to circuit to be mea-
6. Reconnect power to circuit to be
7. Read the voltage on the TPI 100.
Make sure that the ground and positive leads
are plugged into the proper receptacle for cor-
measured.
jack.
sured.
sured.
Note: For Auto mode to operate
properly, DC voltage must be between
+0.7 and 600V. AC voltage must be
between 3 and 500V.
responding function positions.
Do not attempt to make a
voltage measurement of
more than 500V or of a
voltage that is unknown.
5
mea-