25 Switchcraft Inc., 25 Datasheet - Page 316

• Manufacturer Part Number: 25
• Description: S. F. JAX
• Manufacturer: Switchcraft Inc.
• Series: SF-JAX®r

Specifications of 25

• Rohs Information: Switchcraft RoHS Info.
• Connector Type: Phone Jack
• Gender: Female
• Signal Lines: Mono
• Plug/mating Plug Diameter: 6.35mm (0.250", 1/4") - Headphone
• Number Of Positions/contacts: 2 Conductors, 6 Contacts
• Internal Switch(s): Two Switches
• Mounting Type: Panel Mount
• Termination: Solder Eyelet(s)
• Shielding: Unshielded
• Features: Thread Lock
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Color: -
• Lead Free Status / Rohs Status: Not Compliant

FAX: 773 792 - 2129
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
MULTIPLE-STATION SWITCHES (continued)
DW MULTI-SWITCH ACCESSORIES
ESCUTCHEON MODULES, SERIES DW100 AND DW200
Modules are available in colors to match or contrast with
Series 65000 pushbutton colors. Modules are simply slipped
over the pushbuttons before the switch is mounted on the
panel. Flanges on modules overlap the panel cutout and hold
modules securely in place while adding only 0.02" (.051 mm)
behind panel space.
One module is required for each station. Installation of the
Series DW200 Modules (with barrier) is equally simple. First,
place one Series DW100 Module over the pushbutton
actuator on one end of the row. On the adjacent actuator,
place a Series DW200 Module. Position this module so that
the barrier overlaps the edge of the Series DW100 Module.
Install the remaining Series DW200 modules in the same
manner, with the barriers overlapping. The completed
escutcheon will have barriers between adjacent pushbutton
actuators, but no barriers at the ends of the rows.
* Other colors available on special order.
◊ Special order only; Contact Switchcraft for price and delivery information.
(without barrier)
Series DW-100
◊DW101
DW102
DW05
Series DW-200
(with barrier)
PANEL OPENING
◊DW201
DW202
DW205
DW100
DW200
DIMENSIONS ARE FOR REFERENCE ONLY
Color*
White
Black
Red
SPECIAL SWITCHING FORMS
In addition to 2-C and 4-C switching, other circuit forms can
be supplied on special order. They are: 1-A, 2-A, 3-A, 4-A,
1-B, 2-B, 3-B, 4-B, 1-C, 3-C, 1-D, 2-D, 3-D, and 4-D.
BARRIERS (SERIES 67000 ONLY)
As an option, (field installable) barriers can be specified and
installed. Sturdy wire barriers fit between pushbuttons and
prevent accidental simultaneous actuation of adjacent
push-buttons. When a pushbutton is depressed, the fingertip
is guided away from adjacent pushbuttons, and all pressure is
applied to the correct pushbutton.
Switchcraft Part Number ◊P2359 Barriers (package of 25)
SOLENOID RELEASE
Solenoids provide electromechanical assistance in releasing locked
switch stations in switches with up to 12 stations. Release can be
effected from a local or remote position. Solenoids are available for use
with switches having inter-lock, all-lock, or push-lock/push-release
mechanical functions. All solenoids are “pull-type”. When ordered
separately, solenoids are supplied with all mounting hardware. Brass
terminals accept “push-on” type clips (ARK-LES #3500M20C), or
wiring can be soldered directly to the lugs.
SPECIFICATIONS
Frame, Latch Bar, and Switch Housing: Steel, plated.
Mounting Studs (Series 66000 and 67000):
Same as frame above.
Pushbutton Actuators (Series 65000): Molded thermoplastic.
Pushbuttons (Series 66000 and 67000):
Molded thermoplastic.
Terminals: Copper alloy, silver-plated.
Contactors: Copper alloy, plated.
Terminal Board: Rigid plastic.
Lamp Socket (Series 67000): Copper alloy, plated.
* Direction indicates side of switch frame solenoid is mounted on
Number
(solenoid terminals up).
◊DW1
◊DW3
◊DW4
◊DW7
Part
Lock/Push-
(mm)
All-Lock or
Inch
Function
Interlock
Interlock
Release
All-Lock
Switch
Push-
Mounting*
Right
Right
DW SWITCH – ACCESSORIES
Left
Left
DW SWITCH – ACCESSORIES
115 AC,
115 AC,
Voltage
24 DC
24 DC
60 Hz
60 Hz
Coil Res.
(Ohms)
14.2
8.96
361
130
SWITCHES
Cycle
Duty
20%
10%
20%
10%
311