DSP2A-L2-DC3V PANASONIC EW, DSP2A-L2-DC3V Datasheet - Page 6

• Manufacturer Part Number: DSP2A-L2-DC3V
• Description: DSP Relay
• Manufacturer: PANASONIC EW

NOTES
1. Soldering should be done under the
following conditions:
250°C
300°C
350°C
2. Cleaning
For automatic cleaning, the boiling
method is recommended. Avoid
ultrasonic cleaning which subjects the
relays to high frequency vibrations, which
may cause the contacts to stick.
It is recommended that a fluorinated
hydrocarbon or other alcoholic solvents
be used.
For Cautions for Use, see Relay Technical Information
482°F
572°F
662°F
within 10 s
within 5 s
within 3 s
All Rights Reserved © COPYRIGHT
3. External magnetic field
Since DY relays are highly sensitive
polarized relays, their characteristics will
be affected by a strong external magnetic
field. Avoid using the relay under that
condition.
4. Coil operating power
Pure DC current should be applied to the
coil. The wave form should be
rectangular. If it includes ripple, the ripple
factor should be less than 5%.
However, check it with the actual circuit
since the characteristics may be slightly
different.
Panasonic Electric Works, Ltd.
5. When using, please be aware that
the a contact and b contact sides of 1
Form A and 1 Form B types may go on
simultaneously at operate time and
release time.
DS-P