NT31C-ST143B-EV3 Omron, NT31C-ST143B-EV3 Datasheet - Page 190

• Manufacturer Part Number: NT31C-ST143B-EV3
• Description: 5.7,8-color,dis,stn,black,eng
• Manufacturer: Omron

Specifications of NT31C-ST143B-EV3

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

6-9-5
System Settings
Setting the Printer Controller
Reference:
The default (factory) setting is OFF.
Set the buzzer sound by following the menu operation from the System Menu
shown below.
To set other memory switches, select the relevant screen using the [ ] (next
screen) or [ ] (previous screen) touch switch, then make the setting.
The NT31/NT31C has a function for printing out data at a printer connected to
it in response to an instruction from the host or operation at the NT31/NT31C.
Three types of printer can be connected to the NT31/NT31C: select the type
used with this memory switch setting.
• There are other instructions and settings relating to the buzzer, but this
• For details on the buzzer, refer to 2-15-5 Buzzer Function in the Refer-
• To confirm the settings and quit the memory switch setting screen, press
• To quit the memory switch setting screen without confirming the settings,
• ESC/P:
memory switch setting has the highest priority.
ence Manual.
the Quit touch switch. The settings made last will be set and the NT31/
NT31C will return to the MAINTENANCE MODE MENU screen.
press the Abort touch switch. The NT31/NT31C will return to the MAIN-
TENANCE MODE MENU screen with the previous settings still in effect.
Ver 4.12
The setting option changes each time
the touch switch is pressed.
Press Buzzer Sound to display ON, OFF,
or ERROR ON.
Select Maintenance Mode.
Select Memory Switch.
Section 6-9
173