A165E-02 Omron, A165E-02 Datasheet - Page 10

• Manufacturer Part Number: A165E-02
• Description: 2 NC CONTACTS
• Manufacturer: Omron

Specifications of A165E-02

• No. Of Poles: 2
• Contact Current Max: 5A
• Contact Voltage Ac Max: 250V
• Contact Voltage Dc Max: 30V
• Switch Terminals: Solder
• Circuitry: DPST-NC
• Control Type: Push Button
• Contact Form: DPST - NC
• Illuminated: N
• Description/function: Emergency Stop Switch
• Illumination: Non-Illuminated
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: A165E Series Emergency Stop Switches
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Safety Precautions for All Pushbutton Switches
For the individual precautions for a Switch, refer to the Safety Precautions in the section for that Switch.
WARNING
Do not perform wiring with power supplied to the
Switch. Do not touch the terminals or other charged
parts of the Switch while power is being supplied.
Doing so may result in electric shock.
Caution
Do not apply a voltage between the incandescent lamp
and the terminal that is greater than the rated voltage.
Doing so may damage the lamp or LED and cause the
Operation Unit to pop out.
Always turn OFF the power and wait for 10 minutes
before replacing the incandescent lamp. If the lamp is
replaced immediately after the power is turned OFF,
the remaining heat may cause burns.
Precautions for Correct Use
For details, refer to the Precautions for Correct Use in the
Technical Guide for Pushbutton Switches.
C-1
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 All Rights Reserved.