C200HW-PD025 Omron, C200HW-PD025 Datasheet - Page 5

• Manufacturer Part Number: C200HW-PD025
• Description: Power Supply
• Manufacturer: Omron

Specifications of C200HW-PD025

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

The CX-One FA Integrated Tool Package makes design,
development, and maintenance easy and efficient.
F-8
3
3
Integrated OMRON PLCs and Component Support Software
FA Integrated Tool Package
The CX-One is an FA Integrated
Tool Package for connecting,
setting, and programming OMRON
components, including PLCs. CS1
programming and settings can be
done with just the CX-Programmer,
but the CX-One provides Support
Software for setting and
programming PTs, Temperature
Controllers, and many other
components. Using the CX-One
makes programming and setup
easy, shortening the total lead time
required for starting up machines
and equipment.
Easy Programming
Improved Programming Efficiency with Single-key Operation
The CX-Programmer features the “Single-key
Concept” to increase operability. Apart from
inputs to ladder diagrams, history searches,
and model jumps, single-key operation can be
used for simulation debugging as well.
● Excellent Operability Makes Programming and Debugging Easy
Search functions, such as Find Back (searching
for input conditions or outputs with the same
address) and Find Address can be executed with
a single key.
Single-key Inputs
Single-key Searches and Jumps
The allocation of shortcut keys can be checked in the
guidance for ladder input key operations. Key inputs,
such as the
Key for OUTPUT instruction, and the
special instructions are convenient when
programming.
Just press the
comment to complete the input condition. Special
instruction can be input as shown in the following
figure.
Lines can be easily connected using key operations.
Ctrl
Key for NO input conditions, the
Key and enter the bit number and
Key for
Note: 1. The Ladder Monitor is required to monitor ladder programs running on
CX-One Configuration
1
2
3
4
5
6
2. Include with CX-One Lite version 4.0 and in CX-One version 3.2 or later.
CS/CJ-series PLCs from an NS-series PT.
Motion Control
Software
Component Software for
Temperature Controllers
Network Software
PLC Software
HMI Software
PLC-based Process
Control Software
Simulation and debugging of a PLC program can
also be executed with a single key. Applications
using both a PLC and Programmable Terminal can
be debugged using a computer without the actual
devices using PLC-PT Integrated Simulation.
Icons for the simulation function can be accessed directly.
Single-key Simulation
CX-Integrator CX-FLnet CX-Protocol
CX-Configurator FDT Network Configurator
CX-Programmer
CX-Simulator
SwitchBox Utility
CX-Designer
The Ladder Monitor Software is included. (See note 1.)
NV-Designer
CX-Drive
CX-Motion-NCF CX-Motion-MCH
CX-Position
CX-Motion
CX-Process Tool
Face Plate Auto-Builder for NS
CX-Thermo
(See note 2.)
Multiple Languages Can Be Combined To Make Programming Flexible
Debugging
Management of Multiple Networks
The multilingual feature supports IEC
61131-3. Programming is possible in a
language that is appropriate for the process
by combining ladder diagram and ST
languages. Function blocks can be created
to make programming even more efficient.
The operation of networks with
configurations consisting of multiple
networks including PLC networks such as
EtherNet/IP and Controller Link, field
networks such as DeviceNet and CompoNet,
and networks for Programmable Terminals
and Serial Devices, can be restored
simultaneously from the CX-One. Onsite
start up and debugging can be conducted
efficiently and without errors because PLCs
and devices can be selected from the
window to transfer programs and parameter
data to the computer during operation.
Time Require for Debugging and Maintenance Has Been Reduced with
the Comprehensive Data Trace Function
Functionality and operability has been
significantly upgraded compared to the
previous data trace function. The new data
trace function provides comprehensive
debugging, such as I/O comment display of
sampled addresses, specification using
symbols, checking the measurement time
between two selected points, and layering
waveforms. Furthermore, data sampled
from the CPU Unit’s trace memory can be
saved to a file on the computer at a
specified frequency. This can be used as for
long-term logging of data.
CX-Integrator
OMRON FB Library, SAP
Ladder diagrams, communications programs, and control screens can
be created simply by selecting and pasting program modules from the
extensive libraries. Using FB and SAP modules to build the programs,
it is possible to create programs that are easier to understand.
Ladder diagram Monitoring for
Multiple PLCs
Multiple PLCs can be monitored by
displaying them in series on the screen.
This way it is easy to debug data links
between PLCs and monitor the inputs and
outputs of different PLCs.
● Data Trace Function
The traced waveforms can be
displayed as layers.
User program
Node 1
PLC1
Task
Task
Task
Task
Sampled values from a specific word will be displayed.
Node 2
PLC2
A programming language suitable for the
process can be used.
a : = a + 1;
RESULTS=0.0;
IF M=TRUE THEN
RESULTS=SIN (date):
ENDIF;
Sampled value from a
specific input bit will be
displayed.
Node 3
PLC3
Ladder diagram:
Controls the
equipment and
external devices.
Structured Text (ST):
Simplifies math
calculations and
character string
processing.
Sequential Function
Charts (SFC):
Controls the steps
in processing.
FB
CX-Programmer
Function Block
(FB): Can be
used and reused
as modules.
Exchanging
data with
PLC
Configured with an NS-series PT
CX-Designer
Batch Backup
Batch Backup/Restore with a
Computer
A computer can be used to backup,
compare, or restore data for all or specific
PLC Units when connected online. Backup
information is automatically tagged with a
date stamp. It is thus possible to return to
the state before an error occurred. It is also
Component Software
Improved Functional
Connectivity with HMI Design
Software and Integration of
Component Software
The CX-Designer can be started from the
CXIntegrator's NT Link Window. It can be
used to design HMI screens. In addition, the
Smart Active Parts (SAP) Library is provided
with the CX-Designer to enable easily
creating setting screens for devices such as
Temperature Controllers.
Temperature Controller
Specified backup
destination folder
PLC Backup
Software
NT Link
Example:
is visible.
Restore
NS-series PT
Backup
easy to identify the file
for restoring data when
an error occurs.
Compare
(CPU Unit + Configuration Units)
SYSMAC CS/CJ-series PLC
Serial (CompoWay/F)
Temperature
(SAP)
Controller
Smart Active Parts
F-9