D4BL-1CRB Omron, D4BL-1CRB Datasheet - Page 13
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
D4BL-1CRB
Manufacturer Part Number
D4BL-1CRB
Description
Safety Switch
Manufacturer
Omron
Series
D4BLr
Datasheet
1.D4BL-1DRA-A.pdf
(16 pages)
Specifications of D4BL-1CRB
Lead Free Status / Rohs Status
Details
Safety Precautions
Refer to the “Precautions for All Switches” and “Precautions for All Safety Door Switches”.
Stopper Installation
Do not use a Switch as a stopper. Be sure to install a stopper as
shown in the following illustration when mounting the Switch so that
the Operation Key is within 0.5 to 5 mm of the set zone.
Do not subject the Switch to a shock that exceeds the Switch's shock
resistance of 1,000 m/s
• Do not use the Switch submersed in oil or water or in locations
• Always attach the cover after completing wiring and before using
• Make sure the Switch is mounted securely to prevent it from falling
Injury may occasionally occur. Always check to make
sure that the safety functions operate correctly before
using the machine. The safety functions may not operate
correctly because of wiring mistakes, setting mistakes,
or Switch malfunction, causing some machines to
continue operating in situations where they should be
stopped.
Injury may occasionally occur. If the machine is used
with the release key in the UNLOCK position, the
electromagnetic lock may not operate, causing some
machines to continue operating in situations where they
should be stopped. Be sure to put the release key in the
LOCK position before using the machine. Also, check
the condition of the lock and safety circuits.
Injury may occasionally occur. When the
electromagnetic lock function or Switch function is
damaged, some machines may continue operating in
situations where they should be stopped. Do not use the
electromagnetic lock function of the Switch in place of a
door lock. Always provide a lock separate from the
Switch, attach a warning seal to prevent people from
using excessive force to open the door when it is locked,
or provide an indicator lamp to show the locked/unlocked
status of the door.
Correct
Incorrect
continuously subject to splashes of oil or water. Doing so may
result in oil or water entering the Switch. (The IP67 degree of
protection of the Switch specifies the amount of water penetration
after the Switch is submerged in water for a certain period of time.)
the Switch. Also, do not turn ON the Switch with the cover open.
Doing so may result in electric shock.
off. Otherwise injury may result.
Set zone
Gap
Precautions for Safe Use
Switch
Stopper
2
.
DANGER
Correct
Incorrect
Appropriate Tightening Torque
Loose screws may result in malfunction. Tighten the screws to the
specified torques.
* Use M5 screws. Apply a torque of 4.90 to 5.88 N·m for an
Auxiliary Release Key
Solenoid Lock Models
The solenoid lock locks the door only when power is supplied to the
solenoid. Therefore, the door will be unlocked if the power supply to
the solenoid stops. Therefore, do not use solenoid lock models for
machines that may be operating and dangerous even after the
machine stops operating.
• The auxiliary release key is used to unlock the D4BL in case of
• Use the enclosed Release Key to change the lock from LOCK to
• Whenever the lock has been changed to UNLOCK, always return
• Do not use the auxiliary release key to start or stop machines.
• Make sure that the auxiliary release key is kept with the person in
• To prevent the auxiliary release key from being handled carelessly
• Before attaching the cover to the D4BL, make sure that the
No.
Allen-head bolt. For a pan head screw, apply a torque of 2.35 to
2.75 N·m
2. Four, M4 cover-mounting
1
2
3
4
5
6
7
5. Two, M5 Operation Key mounting screw
emergency or in case the power supply to the D4BL fails.
UNLOCK so that the lock will be released and the door can be
opened. (Applies only to mechanical locks. Release key is not
provided with D4BL-2GRD-AT.)
it to LOCK before using the Switch.
charge.
by unauthorized people, seal the auxiliary release key with sealing
wax and the provided seal cap to ensure IP67.
auxiliary release key position is set to LOCK.
screw
6. Conduit
M3.5 terminal screw
(including terminal screw)
Cover mounting screw
Head mounting screw
M5 body mounting screw *
Operation Key mounting screw
Connector
Cap screw
Precautions for Correct Use
UNLOCK
4. Four, M5
switch-mounting screw
Type
LOCK
Auxiliary
release key
3. Four, M3.5 head-mounting screw
7. Conduit cap
0.59 to 0.78 N·m
1.18 to 1.37 N·m
0.78 to 0.98 N·m
4.90 to 5.88 N·m
2.35 to 2.75 N·m
1.77 to 2.16 N·m
1.27 to 1.67 N·m
Appropriate
tightening
torque
D4BL
13