E5C2-R20P-D AC220/240 32-572F Omron, E5C2-R20P-D AC220/240 32-572F Datasheet - Page 5

• Manufacturer Part Number: E5C2-R20P-D AC220/240 32-572F
• Description: TEMPERATURE CONTROLLER
• Manufacturer: Omron
• Series: E5C2r
• Type: Temperature Controller, Analogr

Specifications of E5C2-R20P-D AC220/240 32-572F

• Input Type: RTD
• Controller Type: On/Off
• Temperature Range: 32 ~ 572°F
• Output Type: Relay
• Supply Voltage: 200 ~ 240VAC
• Size: 48mm W x 48mm H (1/16 DIN)
• Features: 8-Pin Plug In Mounting
• Display Type: Scale
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Communications: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: E5C2-R20P-DAC220/24032-572F; E5C2R20PDAC22024032572F

Hard Protective Cover
A Hard Protective Cover (Y92A-48B) is available. It can be used in
the following cases.
• To protect the setting section, against dust and dirt
• To prevent accidently changing settings by touching the front of the
• To protect the Controller from water drips
Safety Precautions
Refer to Safety Precautions for All Temperature Controllers.
■ Correct Use
Mounting
Track Mounting (E5C2 with P2CF-08)
When mounting two or more E5C2 models with track-mounting
sockets, leave a space of approximately 20 mm on both sides of the
sockets where hooks are located.
Flush Mounting
Insert E5C2 into the square hole of the panel and insert an adapter
from the back so that there will be no space between E5C2 and the
panel. Then, secure the E5C2 with a screw.
Appearance
Model
Controller.
Panel
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Tightening screw
P2CF-08
In the interest of product improvement, specifications are subject to change without notice.
Hook
20
Y92A-48B
Duct
Applicable Thermistor
Connect a Thermistor with a replaceable element (E52-THE5A, E52-
THE6D, or E52-THE6F) to the E5C2-R20G. Refer to E52 for details.
The P3G-08 can be wired in the same way as the P2CF-08.
Dismounting
If flush mounted, loosen the screw of the adapter and disengage the
hooks for dismounting.
Temperature Setting
Do not turn the temperature setting knob of the E5C2 with excessive
force, otherwise the stopper of the knob may break.
Others
• Do not remove the housing of the E5C2, otherwise the housing
• To clean the surface of the E5C2, use a soft cloth wet with neutral
may break.
detergent or alcohol. Do not use any organic solvent, such as paint
thinner or benzine, strong acid or strong alkali to clean the surface
of the E5C2, otherwise the surface of the E5C2 will become
damaged.
E5C2
5