E69-FBA Omron, E69-FBA Datasheet - Page 4

• Manufacturer Part Number: E69-FBA
• Description: E6B2 MOUNTING FLANGE
• Manufacturer: Omron

Specifications of E69-FBA

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: E69FBA

Safety Precautions
Refer to Warranty and Limitations of Liability.
This product is not designed or rated for ensuring
safety of persons either directly or indirectly.
Do not use it for such purposes.
Incorrect wiring may damage internal circuits.
Do not use the Encoder under ambient conditions that exceed the
ratings.
● Mounting
Dimensions
Encoder
E6B2-C
Accessories (Order Separately)
Couplings
E69-C06B
E69-C68B
E69-C610B
E69-C06M
Refer to Accessories for details.
• Origin Indication
It is easy to adjust the position of phase Z with the origin indication
function. The following illustration shows the relationship between
phase Z and the origin. Set cut face D to the phase Z origin as
shown in the illustration.
Phase Z origin
Precautions for Correct Use
120˚
Precautions for Safe Use
WARNING
30±
0.2
120˚
dia.
Flanges
E69-FBA
E69-FBA02
Origin of phase Z
Cut face D
Origin
120˚
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
30±
Three, M3 holes;
Depth: 7 mm
0.2
dia.
120˚
*E6B2-CWZ6C/5B/3E:
E6B2-CWZ1X:
5-dia. vinyl-insulated round cable with 5 conductors
(Conductor cross section: 0.2 mm
diameter: 1.0 mm), Standard length: 0.5 m
5-dia. vinyl-insulated round cable with 8 conductors
(Conductor cross section: 0.2 mm
diameter: 1.0 mm), Standard length: 0.5 m
40 dia.
● Wiring
Spurious pulses may be generated when power is turned ON and
OFF. Wait at least 0.1 s after turning ON the power to the Encoder
before using the connected device, and stop using the connected
device at least 0.1 s before turning OFF the power to the Encoder.
Also, turn ON the power to the load only after turning ON the power
to the Encoder.
• Do not extend the length of the cable to more than 2 m. If the cable
20 dia.
must be more than 2 m, use a Model with a Line-driver Output
(max. length: 100 m).
-0.021
0
Servo Mounting Bracket
E69-2
6
-0.012
0
dia.
1
2
2
, Insulation
, Insulation
10
15
5
39
*
8
7.5
E6B2-C
(Unit: mm)
4