323127 TE Connectivity, 323127 Datasheet - Page 46

• Manufacturer Part Number: 323127
• Description: SOLIS SPD 22-16COMM 22-18MIL 6
• Manufacturer: TE Connectivity
• Type: Spade Tongue Terr
• Series: 322r

Specifications of 323127

• Wire Gauge: 16-22
• Body Plating: Tin
• Body Material: Copper
• Insulation: Non-Insulated
• Product Depth (mm): 6.35mm
• Product Length (mm): 15.82mm
• Color: Not Required
• Angle: Straight
• Brand/series: SOLISTRAND
• Contact Plating: Tin
• Gender: Female
• Insulation Type: Non-Insulated
• Length, Overall: 0.623 "
• Material, Contact: Copper
• Primary Type: Fork
• Size, Stud: 6
• Special Features: One Barrel, Brazed Seam
• Width, Overall: 0.25 "
• Wire Size: 22-16 AWG
• Product: Spades
• Wire Size (awg): 22-16
• Stud / Tab Size: 6
• Contact Material: Copper
• Termination Style: Crimp
• Insulation Material: Not Insulated
• Maximum Bundle Diameter: 1.55 mm
• Terminal Shape: Spade Tongue
• Receptacle Style: Straight
• Body Style: SOLISTRAND
• Barrel Type: Closed Barrel
• Wire/cable Type: Regular Wire
• Insulation Support: Non-Insulation Support
• Stud Diameter (mm [in]): 3.68 [0.145]
• Stud Size: 6 [M3.5]
• Shape: SPADE-023
• Heavy Duty: No
• Finish: Tin
• Wire/cable Size (cma): 509 – 3,260
• Wire Range (mm [awg]): 0.30-1.40² [22-16]
• Barrel I.d. Min. (mm [in]): 1.55 [0.061]
• Stock Thickness (mm [in]): 0.79 [0.031]
• Government/industry Qualification: No
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• High Temperature Rating (°c [°f]): 170 [338]
• Packaging Method: Loose Piece
• Lead Free Status / RoHS Status: Compliant

46
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Description of MIL-T-7928G Test Procedures and Requirements for Te r m i n a l s
Procedure for Vibration Testing of Terminals per MIL-T-7928G
Vibration to be a simple harmonic motion with an amplitude of 0.03 inches (0.06 total excursion). Frequency to vary
uniformly from 10–55 Hz and back to 10 Hz. Frequency to be traversed in approximately one minute.
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
#12 AWG and larger or terminals
Group
Test
#14 AWG and smaller with
1
2
3
4
with insulation support
no insulation support
Wire Size
Sequence
Test
C
C
C
D
A
B
A
B
A
B
A
B
Salt Spray/Corrosion
Salt Spray/Corrosion
Current Cycling
Voltage Drop
Voltage Drop
Voltage Drop
Voltage Drop
Heat Age
Vibration
Tensile
Tensile
Tensile
Type
Test
“D” Dimension
12 inches
17 inches
Test
Description
Samples subjected to 50 cycles, each cyle consisting of
30 minutes at 125% of the current listed on page 48
followed by 15 minutes with no load.
See test method and requirements on page 48.
See test method on page 46.
See test method and requirements on page 48.
See test method and requirements on page 47.
Samples subjected to a salt spray/fog for 48 hours.
Salt concentration to be 5%, temperature to be 35° C
(95°) F, relative humidity to be 95-98%.
See test method and requirements on page 48.
See test method and requirements on page 47.
Samples subjected to 193° C for 120 hours then cooled
to 23° C within one hour.
Samples subjected to a salt spray/fog for 48 hours.
Salt concentration to be 5%, temperature to be 35° C
(95°) F, relative humidity to be 95-98%.
See test method and requirements on page 48.
See test method and requirements on page 47.
18 hours each on horizontal
2 hours each on horizontal
and vertical axis.
and vertical axis.
Duration of Test
Catalog 65505
Revised 9-00