52263 TE Connectivity, 52263 Datasheet - Page 7

• Manufacturer Part Number: 52263
• Description: TERMINAL, RING TONGUE, #10, CRIMP, RED
• Manufacturer: TE Connectivity
• Type: Ring Tongue Terminalr
• Series: Plasti-Gripr

Specifications of 52263

• Stud Size: 4.83mm
• Wire Gauge: 8
• Body Plating: Tin
• Body Material: Copper
• Insulation: Vinyl
• Product Depth (mm): 10.95mm
• Product Length (mm): 39.52mm
• Color: Red
• Connector Type: Ring Tongue
• Insulator Color: Red
• Termination Method: Crimp
• Stud/tab Size: #10
• Wire Size (awg): 8
• Contact Material: Copper
• Contact Plating: Tin
• Rohs Compliant: Yes
• Angle: Straight
• Brand/series: PLASTI-GRIP
• Diameter, Insulation: 0.360 "
• Insulation Type: Vinyl
• Length, Overall: 1.556 "
• Material, Contact: Copper
• Primary Type: Ring
• Size, Stud: 10 "
• Width, Overall: 0.431 "
• Wire Size: 8 AWG
• Product: Rings
• Stud / Tab Size: 10
• Gender: Female
• Insulation Material: Vinyl
• Voltage Rating: 600 VAC
• Terminal Shape: Ring Tongue
• Receptacle Style: Straight
• Body Style: PLASTI-GRIP
• Barrel Type: Closed Barrel
• Wire/cable Type: Regular Wire
• Insulation Support: Insulation Support
• Insulation Diameter (mm [in]): 9.14 [.360] Max.
• Stud Diameter (mm [in]): 5.00 [0.197]
• Shape: RING-044
• Heavy Duty: No
• Finish: Tin
• Voltage (vac): 600
• Wire/cable Size (cma): 13,100 – 20,800
• Wire Range (mm [awg]): 8.00² [8]
• Tongue Material Thickness (mm [in]): 1.02 [0.040]
• Government/industry Qualification: No
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Loose Piece
• Packaging Quantity: 100
• Lead Free Status / RoHS Status: Compliant

Damaged terminals and splices or terminals and splices that do not meet crimp dimension requirements must
be removed from wires, discarded, and replaced with new ones. When removing a terminal or splice, cut the
wires as close as possible to the end of the wire barrel.
PLASTI–GRIP Terminals and Splices are Listed by Underwriters Laboratories Inc. (UL) in File E13288, and
Certified by CSA International in File LR7189; except multi stud ring, ring tongue bent 90 _ , and tube cap
terminals.
Rev
Crimped terminals or splices must hold the wire firmly and have a crimp pull–out test value meeting that
specified in Figure 4.
The force applied during crimping may cause some bending between the wire barrel and wire. Such
deformation is acceptable within the following limits.
i
1. Up and Down
The crimped portion must not be bent beyond the limits shown in Figure 5.
2. Side–to–Side
The crimped portion must not be bent from one side to the other beyond the limits shown in Figure 5.
Adjust tensile testing machine for head travel of 25.4 mm [1.00 in.] per minute. Directly and gradually apply force for
one minute.
1/0
2/0
26
24
22
20
18
16
14
12
10
8
6
4
2
Tyco Electronics Corporation
Figure 4
1235.0 [300]
1112.5 [250]
445.0 [100]
623.0 [140]
801.0 [180]
133.5 [30]
222.5 [50]
356.0 [80]
400.5 [90]
311.5 [70]
57.9 [13]
89.0 [20]
13.4 [3]
22.3 [5]
35.6 [8]
of 19