96
Product Facts
■
■
■
The Tyco Electronics Mated
Tool/Terminal Concept
■
■
■
■
The Crimp
■
■
■
■
Catalog 82004
Revised 10-07
www.tycoelectronics.com
Pre-insulated terminal
designed for complete and
uniformed reliability in the
most difficult circuit
environment
Consists of an unplated or
tin plated brass body or a
tin plated phosphor bronze
body with a specially
designed copper sleeve and
insulation sleeve fitted over
the terminal barrel
Design of the tool dies and
construction of the terminal
insures uniform insulation
thickness under crimping
pressure, transmitting this
pressure evenly to the
center of the crimp area
Tyco Electronics
compression crimping
produces crimps for a
given size wire and terminal
that are precisely alike
in appearance and
performance
Terminal and the crimping
tool are designed as
precisely matched devices
Dies are precision-
engineered from the finest
hard-metal alloys
Crimping pressure is
controlled by a ratchet
device on the hand tool
or a corresponding pre-
calibration in the crimping
jaws of Tyco Electronics
automated crimping
machines
Crimping pressure does not
overstress nor understress
the terminal barrel —
machined dies fully bottom
to the precise crimp height
Resulting termination is
free of contamination
Resistant to most shock and
critical environments
Tensile strength approaches
that of the wire itself
are metric equivalents.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
FASTON Terminals (Insulated and Uninsulated)
PIDG FASTON Receptacles and Tabs
Here is a pre-insulated
terminal designed for
complete and uniform
reliability in most difficult
circuit environments. Each
PIDG Terminal consists of a
tin plated brass body with a
specially designed copper
sleeve and insulation sleeve
fitted over the terminal
barrel. The design of the tool
dies and the construction
of the terminal promotes
uniform insulation thickness
under crimping pressure,
transmitting this pressure
evenly to the center of the
crimp area.
Temperature Rating: 105° C
1
UL and CSA — Nylon.
Range
22-16
16-14
12-10
Wire
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
R
22-16 Stranded
16-14 Stranded
12-10 Stranded
Recognized
E66717
Tyco Electronics
compression crimping
produces crimps for a
given size wire and terminal
that are precisely alike
in appearance and
performance. This is a
calculated result made
possible by designing the
terminal and the crimping
tool as precisely matched
devices. The dies are
precision-engineered from
the finest hard-metal alloys.
Crimping pressure is
controlled by a ratchet
device on the hand tool or
a corresponding pre-
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
105°C Max.
300 V Max.,
R
Certified
LR7189
1
calibration in the crimping
jaws of Tyco Electronics
automated crimping
machines.
Crimping pressure can
neither over-stress nor
understress the terminal
barrel — machined dies
fully bottom to the precise
crimp height required.
The resulting termination
is free of contamination,
is resistant to shock and
critical environments,
and its tensile strength
approaches that of the
wire itself.
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208