TMC2084-HD SMSC, TMC2084-HD Datasheet - Page 36

• Manufacturer Part Number: TMC2084-HD
• Description: Network Controller & Processor ICs DUAL MODE CircLink Cntlr
• Manufacturer: SMSC

Specifications of TMC2084-HD

• Product: Controller Area Network (CAN)
• Number Of Transceivers: 1
• Data Rate: 5 Mbps
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 3 V
• Supply Current (max): 25 mA
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Package / Case: TQFP-48
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2.5.2
2.5.3
2.5.4
2.5.5
Revision 0.2 (10-23-08)
Configuring I/O Port Directions
The direction of each I/O port is configured using shared pins PGS2 - 0. For detailed information, see the
section on Configuration Using Shared Pins.
Open-Drain Mode
Either push-pull or open-drain output type is configurable for ports A, B, and C through the network using
PAOD, PBOD, and PCOD. For detailed information, see the section on Configuration Through Network.
Initializing OUTPUT PORTs
OUTPUT PORTs are initialized to high-impedance by the following events:
The data from the OUTPUT DATA packet are outputted to the corresponding port again when the
OUTPUT DATA packet is received.
Switching Timing In OUTPUT PORTs
To prevent simultaneously switching OUTPUT PORTs which would generate noise, a time delay is
provided for each group ports. The delay time depends on the input clock: 50 ns at 20 MHz clock. The
figure below shows timing relationships between the OUTPUT PORT and the output strobe flag, nPOSTR.
Node dropped from network (EMGYMD = 1; MYRECON asserted)
For detailed information, see EMGYMD in the section on Configuration Through Network.
The INITIALIZE OUTPUT PORT command is received
Hardware reset
The SOFTWARE RESET command is received
DATASHEET
Page 36
Standalone Mode CircLink
SMSC TMC2084
TM
Datasheet
Controller