QBE ITW Chemtronics, QBE Datasheet - Page 2

• Manufacturer Part Number: QBE
• Description: Cleaning Wipes
• Manufacturer: ITW Chemtronics

Specifications of QBE

• Wipe Material: Heavy Duty Lint-free
• Wipe Width: 3"
• Wipe Length: 3"
• Leaded Process Compatible: Yes
• Pack Quantity: 200
• Trade Name, Chemical: QbE
• Dispensing Method: Wipe
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

USAGE INSTRUCTIONS
“Dry” Cleaning with the QbE
“Wet” Cleaning with the QbE
ith the QbE
For Splice Preparation
Buffer Gel Removal
1. Pull one
2. Hold the end face at a 90 degree
3. Draw the end face lightly over the platen in a
4. Do not retrace your cleaning procedure in the
5. Do not use a figure-eight motion; do not use
6. Check your work with a fiber scope or
1. Lightly “spot” the
2. Draw the end-face from the solvent wetted
3. Check your work with a fiber scope or
1. Lightly moisten
2. Lightly dampen a 38540ESD swab,
1. Pull three single
2. Spray a small amount of Electro-Wash
3. Pull the cable through the first wiper and
4. Repeat until the cable “squeaks” clean.
foam platen.
perpendicular to the platen.
smooth linear motion - do not press too hard.
same area.
a “twist & turn” motion.
measuring device.
with Electro-Wash
area to the dry area.
measuring device.
wipe away fiber contaminants.
remove soil from V-grooves on fusion
splicer.
container.
PX Fiber Optic Cleaner into the folded
wipers.
discard.
Buffer Gel Removal
QbE
®
QbE
QbE
®
Wipe over the fiber-safe
QbE
PX Fiber Optic Cleaner.
®
®
®
Wipers out of the
wipe and gently
wipe on the platen
®
®
®
MANUFACTURED BY:
ITW CHEMTRONICS
8125 Cobb Center Drive
Kennesaw, GA 30152
1-770-424-4888
NOTE: This information is believed to be
accurate. It is intended for professional end users
having the skills to evaluate and use the data
properly. ITW Chemtronics
the accuracy of the data and assumes no liability
in connection with damages incurred while using
it.
DISTRIBUTED BY:
REV. C (06/06)
®
®
does not guarantee