AC28 OPTO 22, AC28 Datasheet - Page 2

• Manufacturer Part Number: AC28
• Description: Computers, Interface Cards
• Manufacturer: OPTO 22
• Type: ISAr

Specifications of AC28

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Features: ISA Bus To Pamux Bus Adapter
• Interface: ISA Bus to Pamux Bus
• Temperature, Operating: 0 to +70 °C
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With: Pamux® bus to IBM PC⁄AT

DATA SHEET
INSTALLATION NOTES
Form 741-040917
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • Phone: [phone] • (800) 321-OPTO • Fax: [phone] • www.opto22.com
Dimension and specifications are subject to change. All products and/or company names throughout this data sheet are generally trademarks or registered trademarks of their respective companies.
Installation (continued)
an IBM PC/AT or compatible computer.
Toolkits CD into your CD-ROM drive. The installer should open
automatically; if it does not, open the file setup.exe. Follow
instructions to install the toolkit for the AC28.
Opto 22 Product Support at 800-835-6786 or 951-695-3080, Monday
through Friday, 8 a.m. to 5 p.m. Pacific Time.
The AC28 adapter card installs into any ISA expansion slot of
1. Turn off the computer. Remove the power cord and the
2. Before handling the AC28, discharge excess static electricity
3. Follow instructions in your computer’s documentation for
To install the Pamux driver, insert the Opto 22 Adapter Card
If you have any questions about Pamuxproducts, contact
Installing Hardware
Installing Software
© 2004 Opto 22. All rights reserved. All trademarks, trade names, logos, and service marks referenced herein belong to their respective companies.
Inside Sales: (800) 321-OPTO • Product Support: (800) TEK-OPTO • [phone] • Fax: [phone] • Email: [e-mail]
computer’ s cover.
by touching the computer’s metal chassis.
installing an ISA expansion card such as the AC28.
Acknowledgment Data
acknowledge lines. The acknowledgment data is read at the reset
port address. This Pamux feature works only with the following
revisions of Pamux boards:
Table 3: Communication Acknowledgment
Old AC28 with no connection or any board
New AC28 with no connection or an old
Pamux brain board
New AC28 with new B4
New AC28 with new B5
New AC28 with new B6
You can identify the last board communicated with by using
• AC28: Revision C or later
• B4: Revision L or later
• B5: Revision J or later
• B6: Revision G or later
Refer to Table 3 as a guide to using this feature.
PAMUX Configuration
INTERFACES
CLASSIC PC
FF hex
00 hex
01 hex
02 hex
03 hex
Data
page 2/2