MX0024B-CZ METRIX, MX0024B-CZ Datasheet - Page 3

• Manufacturer Part Number: MX0024B-CZ
• Description: MULTIMETER, DIGITAL, 5000PTS, TRMS
• Manufacturer: METRIX

Specifications of MX0024B-CZ

• Dmm Type: Handheld
• Voltage Measuring Range Dc: 5V To 1000V
• Voltage Measuring Range Ac: 5V To 600V
• Resistance Measuring Range: 500ohm To 50Mohm
• Frequency Measuring Range: 5Hz To 500kHz
• Capacitance: RoHS Compliant

Storage of measurements
Direct display of currents
Even greater safety
All the instruments in the MX Concept
range are equipped with the MEM storage
function.
By gently pressing this key, you can lock
the display, while a second press switches
it back to normal display mode. In addi-
tion, the MX 26, MX 24 and MX 23 are
equipped with the AUTO MEM function.
This enables you, after opening the
measurement circuit, to hold the last
non-zero value measured which remained
stable for at least 1 s.
This is particularly useful when the
measurement points are difficult to
access, forcing the user to concentrate on
the test probes.
Although it does not have a current input, the MX 21 offers an original function for reading measurements in Amperes. Simply use an
MN 89 current clamp (or one of our other 100 mV/A models) and set the rotary switch to the clamp position. The instrument will then
automatically manage the transformation coefficient and display the AC current values directly in Amperes.
Everything is safe! First of all, automatic shutdown of the instrument after 30 minutes without use optimizes the life span of your
battery (this can be deactivated on the MX 26 and MX 24). Secondly, an automatic detection function indicates the presence of a
voltage greater than 24 V or a current greater than 10 A (MX 26, MX 24 and MX 23).
Lastly, the battery and fuses are not accessible unless the measurement leads have been disconnected.
Measurements in µA
Dedicated functions
With its maximum resolution of 0.1 µA, the MX 22 can be used to
measure very low AC or DC currents. This is particularly useful for
applications in electronics, for example.
For simpler use, some models (MX 26, MX 24 and MX 23) offer
dedicated functions.
In this way, when the rotary switch is set to ADP, these multimeters
propose a 500 mV DC or AC+DC calibre for the use of complemen-
tary accessories: temperature sensor, tachometric sensor, current
sensor, etc.
In addition, their V low Z function (low impedance) avoids measuring
the phantom voltages which may be encountered in electrical
systems due to the stray capacitance of the cables.