DF3Z-10P-2V(20) Hirose, DF3Z-10P-2V(20) Datasheet - Page 13

• Manufacturer Part Number: DF3Z-10P-2V(20)
• Description: Conn Shrouded Header HDR 10 POS 2mm Solder ST SMD Bag
• Manufacturer: Hirose
• Type: Shrouded Headerr

Specifications of DF3Z-10P-2V(20)

• Pitch: 2 mm
• Number Of Rows: 1
• Number Of Contacts: 10
• Gender: HDR
• Contact Plating: Tin
• Termination Method: Solder

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BPrecautions
1. Recommended Temperature Profile ( SMT )
2. Recommended Manual Soldering Condition ( SMT )
3. Recommended Screen Thickness ( SMT )
4. Board Warpage ( SMT )
5. Recommended Soldering Condition ( DIP )
6. Cleaning Condition
7. Connection Condition
8. Precations
DF3 Series 2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
Note1: Up to 2 cycles of Reflow soldering are possible under the same conditions, provided that
Note2: The temperature profile indicates the board surface temperature at the point of cintacts with
Soldering iron temperature: 290 10 , Soldering time: Within 3 seconds
0.15
Based on both connector edges, 0.03mm max. in the connector center portion
Refer to the "Nylon Connector Use Hand book".
Refer to the "Nylon Connector Use Hand book".
Refer to the "Nylon Connector Use Hand book".
Flow Condition with Automatic Soldering Tool. Soldering temperature: 250 5 , Soldering time: Within 10 seconds
Manual Soldering Condition. Soldering iron temperature: 290 10 , Soldering time: Within 2 seconds
there is a return to normal temperature between the first and second cycle.
the connector terminals.
0.2mm
B219