HFD6180-418 Finisar Corporation, HFD6180-418 Datasheet - Page 4

• Manufacturer Part Number: HFD6180-418
• Description: Photodetector 6-Pin LC ROSA
• Manufacturer: Finisar Corporation

Specifications of HFD6180-418

• Package: 6LC ROSA
• Rise Time: 0.03 ns

HFD6X80-418
PINOUT
NOTES
1.
2.
3.
4.
5.
6.
Number
The data rate can be increased to 12.5Gbps, but the
sensitivity will be decreased by approximately 3dB.
P R is the average optical power at the fiber face.
P R OMA is the peak to peak optical power at the fiber face
(Optical Modulation Amplitude)
where ER is the extinction ratio (linear) of the optical
source.
Bandwidth and Low Frequency Cutoff are measured with
a small signal sinusoidal light source with –10dBm
average power
Sensitivity is measured with an optical source with an
extinction ratio of 3dB.
Stressed receiver sensitivity is measured with 3.5dB
vertical eye closure (intersymbol interference) and with
1
2
3
4
5
6
Function
V CC
CASE
OUTN
OUTP
CASE
V PD
10GBPS 850NM PIN+PREAMP
7.
8.
9.
10. The PD voltage must be connected to a positive 3.3V
0.3UI of jitter added. The measurement technique is
defined in IEEE 802.3ae.
Rise/Fall times are corrected for optical source Rise/Fall
times. The corrected value is calculated as the square root
of the difference of the squares of the measured
differential detector output and the source.
Value shown is with external power supply filtering.
For best sensitivity, a limiting amplifier may be required
for operation.
power supply (nominal).