PKR4910ASI Ericsson Power Modules, PKR4910ASI Datasheet - Page 26

• Manufacturer Part Number: PKR4910ASI
• Description: Module DC-DC 1-OUT 3.3V 3A 9.9W 18-Pin SMD
• Manufacturer: Ericsson Power Modules
• Type: Step Downr
• Series: PKRr

Specifications of PKR4910ASI

• Package: 18SMD
• Output Current: 3 A
• Output Voltage: 3.3 V
• Input Voltage: 36 to 75 V
• Number Of Outputs: 1
• Output Power: 9.9 W
• Product: Isolated
• Input Voltage Range: 36 V to 75 V
• Output Voltage (channel 1): 3.3 V
• Output Current (channel 1): 3 A
• Isolation Voltage: 1.5 KV
• Package / Case Size: MacroDens
• Output Type: Isolated
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

EMC Specification
Conducted EMI measured according to EN55022, CISPR 22
and FCC part 15J (see test set-up).
The fundamental switching frequency is 485 kHz for
PKR 4713 SI @ V
Conducted EMI Input terminal value (typ)
EMI without filter
External filter (class B)
Required external input filter in order to meet class B in
EN 55022, CISPR 22 and FCC part 15J.
EMI with filter
Prepared (also subject responsible if other)
ESKEVIN
Approved
SEC/D (Julia You)
PKR 4000 series
PKR 4000 series
PKR 4000 series
DC/DC converters, Input 36-75 V, Output up to 1.5 A/7 W
DC/DC converters, Input 36-75 V, Output up to 1.5 A/7 W
DC/DC converters, Input 36-75 V, Output up to 1.5 A/7 W
I
= 53 V, max I
O
.
Filter components:
C1= 1μF 100V
C2= 10μF 100V
C3,C4= 2.2nF
1500Vdc
L1= Pulse PO354
1.17mH
Checked
EZYPING
PRODUCT SPECIFICATION
No.
3/1301-BMR 640 1401+ Uen
Date
2007-8-27
Test set-up
Layout recommendation
The radiated EMI performance of the DC/DC converter will
depend on the PCB layout and ground layer design.
It is also important to consider the stand-off of the DC/DC
converter.
If a ground layer is used, it should be connected to the output
of the DC/DC converter and the equipment ground or
chassis.
A ground layer will increase the stray capacitance in the PCB
and improve the high frequency EMC performance.
Output ripple and noise
Output ripple and noise measured according to figure below.
Output ripple and noise test setup
Technical Specifi cation
Technical Specifi cation
Technical Specifi cation
EN/LZT 146 302 R6E September 2007
EN/LZT 146 302 R6F November 2007
EN/LZT 146 302 R6G November 2008
© Ericsson Power Modules AB
© Ericsson Power Modules AB
© Ericsson Power Modules AB
Rev
D
Reference
1 (5)
26