LCMXO2280C-3TN100I LATTICE SEMICONDUCTOR, LCMXO2280C-3TN100I Datasheet - Page 8
![no-image](/images/manufacturer_photos/0/3/381/lattice_semiconductor_sml.jpg)
LCMXO2280C-3TN100I
Manufacturer Part Number
LCMXO2280C-3TN100I
Description
CPLD MachXO Family 1140 Macro Cells 1.8V/2.5V/3.3V 100-Pin TQFP Tray
Manufacturer
LATTICE SEMICONDUCTOR
Datasheet
1.LCMXO1200C-3FTN256I.pdf
(96 pages)
Specifications of LCMXO2280C-3TN100I
Package
100TQFP
Family Name
MachXO
Number Of Macro Cells
1140
Maximum Propagation Delay Time
5.1 ns
Number Of User I/os
73
Typical Operating Supply Voltage
1.8|2.5|3.3 V
Ram Bits
28262.4
Memory Type
SRAM
Operating Temperature
-40 to 100 °C
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
LCMXO2280C-3TN100I
Manufacturer:
Lattice Semiconductor Corporation
Quantity:
10 000
Lattice Semiconductor
Modes of Operation
Each Slice is capable of four modes of operation: Logic, Ripple, RAM, and ROM. The Slice in the PFF is capable of
all modes except RAM. Table 2-2 lists the modes and the capability of the Slice blocks.
Table 2-2. Slice Modes
Logic Mode: In this mode, the LUTs in each Slice are configured as 4-input combinatorial lookup tables (LUT4). A
LUT4 can have 16 possible input combinations. Any logic function with four inputs can be generated by program-
ming this lookup table. Since there are two LUT4s per Slice, a LUT5 can be constructed within one Slice. Larger
lookup tables such as LUT6, LUT7, and LUT8 can be constructed by concatenating other Slices.
Ripple Mode: Ripple mode allows the efficient implementation of small arithmetic functions. In ripple mode, the fol-
lowing functions can be implemented by each Slice:
Two additional signals, Carry Generate and Carry Propagate, are generated per Slice in this mode, allowing fast
arithmetic functions to be constructed by concatenating Slices.
RAM Mode: In this mode, distributed RAM can be constructed using each LUT block as a 16x2-bit memory.
Through the combination of LUTs and Slices, a variety of different memories can be constructed.
The ispLEVER design tool supports the creation of a variety of different size memories. Where appropriate, the
software will construct these using distributed memory primitives that represent the capabilities of the PFU.
Table 2-3 shows the number of Slices required to implement different distributed RAM primitives. Figure 2-6 shows
the distributed memory primitive block diagrams. Dual port memories involve the pairing of two Slices. One Slice
functions as the read-write port, while the other companion Slice supports the read-only port. For more information
on RAM mode in MachXO devices, please see details of additional technical documentation at the end of this data
sheet.
Table 2-3. Number of Slices Required For Implementing Distributed RAM
• Addition 2-bit
• Subtraction 2-bit
• Add/Subtract 2-bit using dynamic control
• Up counter 2-bit
• Down counter 2-bit
• Ripple mode multiplier building block
• Comparator functions of A and B inputs
- A greater-than-or-equal-to B
- A not-equal-to B
- A less-than-or-equal-to B
PFU Slice
PFF Slice
LUT 4x2 or LUT 5x1
LUT 4x2 or LUT 5x1
Number of Slices
Note: SPR = Single Port RAM, DPR = Dual Port RAM
Logic
2-bit Arithmetic Unit
2-bit Arithmetic Unit
2-5
Ripple
SPR16x2
1
DPR16x2
2
SP 16x2
RAM
N/A
MachXO Family Data Sheet
ROM 16x1 x 2
ROM 16x1 x 2
ROM
Architecture