AP561-F TriQuint, AP561-F Datasheet - Page 2

• Manufacturer Part Number: AP561-F
• Description: RF Amplifier 8W WIMAX POWER AMP 2.3-2.9GHZ
• Manufacturer: TriQuint
• Type: Power Amplifierr

Specifications of AP561-F

• Operating Frequency: 2900 MHz
• Noise Figure: 5.3 dB at 2600 MHz
• Supply Current: 480 mA
• Maximum Operating Temperature: + 158 C
• Number Of Channels: 3 Channels
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 1067743

TriQuint Semiconductor Inc • Phone [phone] • FAX: [phone] • e-mail: [e-mail] • Web site: www.TriQuint.com
AP561
0.7-2.9 GHz 8W Power Amplifier
Application Circuit PC Board Layout
Circuit Board Material: 0.0147” Rogers Ultralam 2000, single layer, 1 oz
copper, ε
Following bias procedure is recommended to ensure proper functionality of AP561 in a laboratory environment. The sequencing is not
required in the final system application.
Turn-on Sequence:
Turn-off Sequence:
1.
2.
3.
4.
1.
2.
3.
r
= 2.45, Microstrip line details: width = .043”, spacing = .050”
Attach input and output loads onto the evaluation board.
Turn on power supply Vcc = +12V.
Turn on power supply Vpd = +5V.
Turn on RF power.
Turn off RF power.
Turn off power supply Vpd = +5V.
Turn off power supply Vcc = +12V.
Evaluation Board Bias Procedure
Bias.
Vpd
Vcc
Notes:
1.
2.
3.
Voltage (V)
Please note that for reliable operation, the evaluation board will have to be mounted to a much
larger heat sink during operation and in laboratory environments to dissipate the power
consumed by the device. The use of a convection fan is also recommended in laboratory
environments.
The area around the module underneath the PCB should not contain any soldermask in order to
maintain good RF grounding.
For proper and safe operation in the laboratory, the power-on sequencing is recommended.
+12
+5
Baseplate Configuration
Specifications and information are subject to change without notice
Page 2 of 15 April 2010