104322 ERNI Electronics, 104322 Datasheet - Page 9

• Manufacturer Part Number: 104322
• Manufacturer: ERNI Electronics

Specifications of 104322

• Lead Free Status / RoHS Status: Compliant

ERbic Profibus
Electrical and mechanical characteristics
Interface connector
D-Sub male or female (PU connection)
D-Sub male reversed version
Cable termination
Cable diameter
Cross section of individual conductor
Termination type
Data transmission rate
Temperature range
Permissible humidity
Protection class
Housing material
D-Sub screw
UL approval
CE marking
* Due to continuous advancement, it is possible that the UL approval of a new version may not have been completed at the time of going to
press.
Pin configuration
Terminal
B (1)
A (2)
B (3)
A (4)
-
-
Catalog E 074441
D-Sub Pin
01/06
3
8
3
8
5
6
RxD/TxD-P
RxD/TxD-N
RxD/TxD-P
RxD/TxD-N
Edition 4
GND
VP (+5V)
Signal
www.erni.com
Profibus is the most widely used field bus. It is promoted by
Siemens and by organized, interested and committed manu-
facturers and users in the PNO (Profibus user organization).
The IP 20 interface on the device side is standardized as a
9-pin D-Sub female connector. The max. data transmission
rate is 12 Mbit/s. The cable is a shielded twisted pair con-
ductor.
The cable sheath is violet and the signal cores are green (A)
and red (B).
With its comprehensive program, ERNI provides customers
with a wide variety of options.
Particular emphasis should be placed on the different termi-
nation technologies, from the traditional screw terminal to the
cage clamp terminal to the IDC terminal.
D-Sub, 9-pin, male
Class 2
Class 3
2 x horizontal, 2 x vertical, MAX: 2 x axial
1 cable outlet can be sealed with blanking plate
4.5 mm (0.177”) – 8.0 mm (0.315”)
Screw terminal: solid max. 1.5 mm
IDC terminal: solid ø 0.64 mm
Cage-clamp terminal: 0.08 - 0.5 mm
Screw terminal, IDC terminal, cage-clamp terminal
According to bus specification, 12 MBit/s
-20 °C – +70 °C
Max. 75 % at + 25 °C, non-condensing
IP 40, MAX: IP 30
Thermoplast UL94V-1, MAX: ZnAl, galvanized
#4/40 UNC, knurled with cross-head
UL E84703 *
ERbic connectors are passive components and do not need
to be identified with the CE marking according to EU direc-
tives.
2
; stranded max. 1.0 mm
2
(0.75 mm
2
)
2
9