SynJet cooling technology provides the most reliable thermal
management solution available. This versatile cooling
solution has been developed by Nuventix, for cooling a wide
array of devices such as Microprocessors, FPGAs, Network
Chips, and LEDs. The XFlow 30 can be used with the
reference heat sink or used with a customer designed heat
sink for cooling higher power devices.
•
•
•
•
Specifications
1
2
3
middle of the heat sink to ambient air measured at the inlet to the SynJet, with a heat source at least 12 cm
performance may vary by application and final product design should be tested to assure proper thermal performance.
4
5
6
(Pavg) at nominal input voltage (VDC). See the Electrical section in the Product Design Guide for a detailed explanation.
All specifications are typical at 25ºC unless otherwise stated.
The XFLow 30 will operate at maximum cooling level by applying power only or can be used with a PWM control to change the cooling level.
Thermal resistance values are given as reference only and are measured in free air without airflow obstructions. Thermal resistance is measured from the bottom
Thermal Design Power is based on a 40ºC temperature rise of heat sink mounting surface above ambient temperature around cooler.
Sound Pressure Level is measured at 1 meter distance per ISO 7779.
The SynJet has a time varying current. The current waveform is sinusoidal and the average current (Iavg) is used to calculate the average power consumption
SynJet
Thermal & Acoustic
Electrical
Environmental
SynJet Setting
High Performance PWM at 100% duty cycle
SynJet Setting
High Performance PWM
at 100% duty cycle
All Settings
High operating temperature up to 85°C
Cools up to 40W
100K Hours Lifetime
Energy Efficient
Operating Relative Humidity
Operating Temperature
Regulatory Compliance
Storage Temperature
2
2
1
®
Storage Altitude
XFlow 30 Cooler 40 W
Reliability
Weight
Voltage
+/- 10%
(VDC)
4635 Boston Lane
Austin, TX 78735
Min
5
-40
-40
5
Θs-a
Imin
20
1.0
Current (mA)
3
100K
Max
15K
135
85
85
95
Iavg
200
TDP
Phone: 512-382-8101
FAX: 512-382-8100
40
4
6
Ipeak
400
(W)
Units
hrs
°C
°C
m
%
g
SPL (dBA)
(mW)
Pavg
1.0
Air temperature surrounding cooler
Air temperature surrounding cooler
CE, UL, FCC Part 15 Class B, RoHS
Conditions
Above sea level
Non-condensing
SynJet with Heatsink
L10 @ 60°C
38
Voltage
2
+/- 10%
(VDC)
using 40W reference heat sink. Actual thermal
5
12
Email: info@nuventix.com
www.nuventix.com
Imin
10
Current (mA)
100
Iavg
Ipeak
6
200
Sept 2010
(mW)
Pavg
1.2
E02