A10340-U1 Antenova, A10340-U1 Datasheet - Page 12

• Manufacturer Part Number: A10340-U1
• Description: Antennas Reference Board for Calvus Penta-band
• Manufacturer: Antenova

Specifications of A10340-U1

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

12 Soldering
This antenna is suitable for lead free soldering.
The reflow profile should be adjusted to suit the PCBA, oven and solder paste, while
observing the following conditions:
13 Hazardous material regulation conformance
Calvus has been designed to be free of halogen flame retardants and is manufactured
using halogen-free material. However, traces of halogens may be present in the final
product if they are included in other processes taking place in the manufacturing plant.
The antenna has been tested to conform to RoHS requirements. A certificate of
conformance is available from Antenova’s website.
14 Packaging
-
-
-
14-1 Optimal storage conditions for packaged reels
Note: Storage of open reels of antennas is not recommended due to possible oxidization of pads
on antennas. If short term storage is necessary, then it is highly recommended that the bag
containing the antenna reel is re-sealed and stored in like storage conditions as in above table.
Integrated Antenna and RF Solutions
Temperature
Humidity
Shelf Life
Storage place
Packaging
The maximum temperature should not exceed 240 ºC
However for lead free soldering, a maximum temperature of 255 ºC for no more than
20 seconds is permitted.
The antenna should not be exposed to temperatures exceeding 120 ºC more than 3
times during the soldering process.
-10ºC to 40ºC
Less than 75% RH
18 Months
Away from corrosive gas and direct sunlight
Reels should be stored in unopened sealed
manufacturer’s plastic packaging.
Calvus GSM SMD Antenna
Product Specification 09MD-0023-3-PS
Part No. A10340
12